Author | Topic |

Toymods member I supported Toymods
Location: Rydalmere, NSW
Registered: May 2002
|
Re: Thermo fans
|
Fri, 03 June 2005 04:04

|
 |
All the Repco fans I've used so far (one 11" and two 10" fans) have come with their own wiring harness and relay. I didn't bother using the harness and relay on the first 10" fan and it lasted for about 5 months. I replaced that with another 10" fan (identical) and wired it up the same way - lasted 4 days.
Replaced that with an 11" fan and wired it up to it's own harness and relay, and that was back in February. No problems since then, except it's a "permo-fan" ie. it stays on the whole time, and not controlled by a thermo-switch. I know where the thermo-switch location is, but I'm not exactly sure how it should be wired in to make it activate only when the thermostat does.
|
|
|