Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » AE86 into TA22

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
NAMDAMAMI
Occasional Poster


Location:
England
Registered:
November 2004
Re: AE86 into TA22 Fri, 03 June 2005 16:04 Go to previous messageGo to previous message
Hi,

Thought I'd update on this matter.

The guy with the rot box AE86 vanished off the face of the earth so it's taken me a while to source the parts I need.

I now have the AE86 engine cross-member, steering rack and T50 gearbox.

Cross-member measurements as follows:

Transverse distance between rear chassis leg bolt holes =
AE86 760mm / TA22 705mm (27.5mm out either side)

Transverse distance between front chassis leg bolt holes =
AE86 775mm / TA22 726.6 (24.3mm out either side)

Longitudinal distance between front & rear holes =
AE86 140mm / TA22 114mm (13mm out)

Note that TA22 measurments taken from Toyota repair manual, AE86 measurments taken by me with tape (so approximate).

So it won't bolt in (well I knew it wouldn't really, wishful thinking on my part), but could it be possible to make it fit? It would mean the AE86 item would overhang into the inner wheel well and may cause clearance issues. I'm also concerned about where the track control arm pick up is positioned in relation to the TA22 item. It's likely the track control arm will also be pushed out and then I'll have problems getting the anti-roll bar to fit.

I need a spare TA22 cross-member for comparison, but now am thinking its a better idea to make one cross-member from the two. Chatted this idea through with an engineer friend of mine and he reckons it shouldn't be too difficult.

The steering rack from the AE86 is probably a bit wide too, but I should be able to shorten the track rod ends. I'm not sure what effect this will have on the steering wheel lock though.

Thoughts and comments welcome.


PS - This will be a slow burner project. All effort this summer is trying to get my 260 back on the road. Cheers.




  Send a private message to this user    

SubjectPosterDate
Read Message   AE86 into TA22 NAMDAMAMIMon, 17 January 2005 18:08
Read Message   Re: AE86 into TA22 ae95Mon, 17 January 2005 20:12
Read Message   Re: AE86 into TA22 ozboyTue, 18 January 2005 02:29
Read Message   Re: AE86 into TA22 munkiTue, 18 January 2005 02:52
Read Message   Re: AE86 into TA22 NAMDAMAMITue, 18 January 2005 07:47
Read Message   Re: AE86 into TA22 vin91Fri, 21 January 2005 09:23
Read Message   Re: AE86 into TA22 NAMDAMAMIFri, 21 January 2005 14:02
Read Message   Re: AE86 into TA22 vin91Sat, 22 January 2005 01:26
Read Message   Re: AE86 into TA22 HodgieSat, 22 January 2005 12:11
Read Message   Re: AE86 into TA22 sillySun, 23 January 2005 06:05
Read Message   Re: AE86 into TA22  NAMDAMAMIFri, 03 June 2005 16:04
Read Message   Re: AE86 into TA22 Purple_BeastySat, 04 June 2005 06:07
Previous Topic:couple of questions about my car
Next Topic:6 speed gear ratios

Goto Forum:
-=] Back to Top [=-

Current Time: Wed Jul 23 17:13:59 UTC 2025

Total time taken to generate the page: 0.0038719177246094 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.