Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Chopped Springs

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Hunty
Forums Junkie


Location:
Adelaide
Registered:
July 2002
 
Re: Chopped Springs Sat, 04 January 2003 10:29 Go to previous messageGo to previous message
lowering less than 30mm u won't need to replace shocks as there should be adequate travel in them providing u have stiffer springs ie not chopped,

if ur cutting springs cut from the bottom the top is flat so the strut top sits in nicely,

chopped springs tend to be bouncy as the spring rate is all stuffed up

to do the proper job u need to match the spring rate of the springs to the shocks and then have that all matched to your car ideally done by profesionals who weigh yur car on all four corners and then do the math but that cost big dollars but the handling improvent is second to none....you get what u pay for
  Send a private message to this user    

SubjectPosterDate
Read Message   Chopped Springs Bboy_SparxFri, 03 January 2003 09:12
Read Message   Re: Chopped Springs CrAiGzEEFri, 03 January 2003 11:20
Read Message   Re: Chopped Springs ApolloFri, 03 January 2003 11:21
Read Message   Re: Chopped Springs  HuntySat, 04 January 2003 10:29
Read Message   Re: Chopped Springs mx83toySat, 04 January 2003 23:00
Read Message   Re: Chopped Springs wizzfizz2097Sun, 05 January 2003 02:35
Read Message   Re: Chopped Springs NorbieMon, 06 January 2003 01:01
Read Message   Re: Chopped Springs RemedyMon, 06 January 2003 02:27
Read Message   Re: Chopped Springs HuntyMon, 06 January 2003 16:19
Read Message   Re: Chopped Springs leebroozleeMon, 06 January 2003 17:39
Read Message   Re: Chopped Springs RemedyMon, 06 January 2003 21:07
Read Message   Re: Chopped Springs roadrunnerMon, 06 January 2003 06:47
Read Message   Re: Chopped Springs mrshinMon, 06 January 2003 08:21
Previous Topic:MR2 driveshafts
Next Topic:100kW 4AG ---> KE10

Goto Forum:
-=] Back to Top [=-

Current Time: Thu Jan 9 22:02:24 UTC 2025

Total time taken to generate the page: 0.0039770603179932 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.