F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » T-50 to 3TGTE Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TE72_Turbo Forums Junkie Location: Canberra Registered: May 2002	Re: T-50 to 3TGTE Sun, 05 June 2005 07:58 Why don't you try lining them up? You'll soon work out that it doesn't work The main issue here is that the proper 3TGTE clutch has 29mm x 21 spines for a W5* box, unlike the smaller 23.8mm input shaft of the T50, so in short, NO, you cannot use the clutch plate with your T50 gearbox at all. You can however use the larger 3TGTE flywheel & pressure plate, and purchase a new clutch plate (not expensive) to suit the 225mm diameter, and 23.8mm x 21 spline T50 box. I did this with mine. The larger flywheel fits fine in the T50 bellhousing, and the ring gear is exactly the same, so no issues with the starter motor. Cheers Phil [Report message to a moderator]

	Subject	Poster	Date
	T-50 to 3TGTE	ToyT18	Sun, 05 June 2005 07:37
	Re: T-50 to 3TGTE	TA22 GT	Sun, 05 June 2005 07:46
	Re: T-50 to 3TGTE	ToyT18	Sun, 05 June 2005 07:54
	Re: T-50 to 3TGTE	ToyT18	Sun, 05 June 2005 07:55
	Re: T-50 to 3TGTE	TE72_Turbo	Sun, 05 June 2005 07:58
	Re: T-50 to 3TGTE	TA22 GT	Sun, 05 June 2005 11:15
	Re: T-50 to 3TGTE	bunkyT18	Sun, 05 June 2005 11:22
	Re: T-50 to 3TGTE	ToyT18	Sun, 05 June 2005 13:45
	Re: T-50 to 3TGTE	ToyT18	Sun, 05 June 2005 13:46
	Re: T-50 to 3TGTE	Norbie	Mon, 06 June 2005 00:22
	Re: T-50 to 3TGTE	ChuckLandwehr	Mon, 06 June 2005 02:10
	Re: T-50 to 3TGTE	ToyT18	Mon, 06 June 2005 07:49
	Re: T-50 to 3TGTE	bunkyT18	Tue, 07 June 2005 04:03
	Re: T-50 to 3TGTE	Norbie	Tue, 07 June 2005 04:44
	Re: T-50 to 3TGTE	Yian	Tue, 07 June 2005 04:50
	Re: T-50 to 3TGTE	ToyT18	Tue, 07 June 2005 08:00
	Re: T-50 to 3TGTE	Norbie	Tue, 07 June 2005 12:39
	Re: T-50 to 3TGTE	bunkyT18	Wed, 08 June 2005 03:20
	Re: T-50 to 3TGTE	Norbie	Wed, 08 June 2005 05:50
	Re: T-50 to 3TGTE	bunkyT18	Wed, 08 June 2005 06:31
	Re: T-50 to 3TGTE	ToyT18	Tue, 07 June 2005 08:11
	Re: T-50 to 3TGTE	GOT_M.I.L.F.	Tue, 07 June 2005 08:29
	Re: T-50 to 3TGTE	blackRA28	Wed, 08 June 2005 03:33
	Re: T-50 to 3TGTE	bunkyT18	Wed, 08 June 2005 05:46
	Re: T-50 to 3TGTE	ToyT18	Wed, 08 June 2005 11:04
	Re: T-50 to 3TGTE	bunkyT18	Mon, 27 June 2005 02:58
	Re: T-50 to 3TGTE	September_Squall	Tue, 28 June 2005 01:26
	Re: T-50 to 3TGTE	bunkyT18	Tue, 28 June 2005 05:03

Previous Topic:	Haltec vs others computers
Next Topic:	2tgeu weight?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.