| Author | Topic |
|---|
Location:
Melbourne
Registered:
October 2003
|
|
Re: How would 268 degree cams run on a 3sge!
|
Tue, 07 June 2005 11:22
 
|
 |
| RWDboy wrote on Tue, 07 June 2005 12:23 |
Adrian -> driveability will go out the window. I could tell you why but you probably won't listen 
Don't bother with the cams.
And as for 'the rest of the modifications being a tad expensive' - well that makes no sense to me at all man 
One thing though, you may not need stronger valve springs, depending how high the lift on the cam is.
|
Yeah i thought this would be the ccase, Drivability is something I would prefer to keep..
What i mean't by the rest of the mods being a tad expensive is the fact that you usually have to rebuild the engine as most of it has to come out to do so... NA that is.. What i was thinking was Port and Polish, Honing out the block etc...
Any other thoughts on the topic or better choices!
|
|
|
| | Subject | Poster | Date |
|---|
 |
How would 268 degree cams run on a 3sge!
|
TRD-ST162 | Sun, 05 June 2005 04:02 |
|
Re: How would 268 degree cams run on a 3sge!
|
September_Squall | Sun, 05 June 2005 11:42 |
|
Re: How would 268 degree cams run on a 3sge!
|
-==L=a=N=c=E==- | Sun, 05 June 2005 12:06 |
|
Re: How would 268 degree cams run on a 3sge!
|
StuC | Sun, 05 June 2005 12:12 |
|
Re: How would 268 degree cams run on a 3sge!
|
TRD-ST162 | Sun, 05 June 2005 12:27 |
|
Re: How would 268 degree cams run on a 3sge!
|
StuC | Mon, 06 June 2005 11:02 |
|
Re: How would 268 degree cams run on a 3sge!
|
RWDboy | Tue, 07 June 2005 02:23 |
|
Re: How would 268 degree cams run on a 3sge!
|
TRD-ST162 | Tue, 07 June 2005 11:22 |
|
Re: How would 268 degree cams run on a 3sge!
|
RWDboy | Tue, 07 June 2005 12:49 |
|
Re: How would 268 degree cams run on a 3sge!
|
Matt-itude | Tue, 07 June 2005 14:05 |
|
Re: How would 268 degree cams run on a 3sge!
|
Classique71 | Wed, 08 June 2005 02:42 |
|
Re: How would 268 degree cams run on a 3sge!
|
Cyber-punk | Wed, 08 June 2005 07:34 |
|
Re: How would 268 degree cams run on a 3sge!
|
TRD-ST162 | Wed, 08 June 2005 08:36 |
|
Re: How would 268 degree cams run on a 3sge!
|
Matt-itude | Thu, 09 June 2005 07:12 |
|
Re: How would 268 degree cams run on a 3sge!
|
RWDboy | Thu, 09 June 2005 14:54 |
