| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 210's on a 6M
|
Mon, 06 January 2003 01:26
 
|
 |
If you have done nothing to increase airflow into the engine (ie cams/porting/exhaust/turbo - cold air intake will do SFA) then you will gain nothing by doing this. It will just make the engine run a bit rich.
That said the blue 4AGE injectors would be the go - same plug, same impedence, same operating pressure. To fit them you will need to get to the injector rail....to get to this you may need to separate the top half of the intake manifold from the bottom half. Order the manifold gasket now - it may have to come from Japan. I think the 6MGE gasket might be different to the 5MGE.
|
|
|
| | Subject | Poster | Date |
|---|
 |
210's on a 6M
|
Cressida Supra | Sun, 05 January 2003 14:08 |
|
Re: 210's on a 6M
|
gianttomato | Mon, 06 January 2003 01:26 |
|
Re: 210's on a 6M
|
Norbie | Mon, 06 January 2003 07:47 |
|
Re: 210's on a 6M
|
gianttomato | Mon, 06 January 2003 07:59 |
|
Re: 210's on a 6M
|
Norbie | Mon, 06 January 2003 12:58 |
|
Re: 210's on a 6M
|
Cressida Supra | Mon, 06 January 2003 13:28 |
|
Re: 210's on a 6M
|
Cressida Supra | Mon, 06 January 2003 13:56 |
|
Re: 210's on a 6M
|
gianttomato | Mon, 06 January 2003 20:59 |
|
Re: 210's on a 6M
|
Norbie | Tue, 07 January 2003 00:15 |
|
Re: 210's on a 6M
|
Cressida Supra | Tue, 07 January 2003 14:49 |
|
Re: 210's on a 6M
|
justcallmefrank | Wed, 08 January 2003 10:05 |
|
Re: 210's on a 6M
|
kevz0r | Wed, 08 January 2003 16:08 |
|
Re: 210's on a 6M
|
justcallmefrank | Wed, 08 January 2003 21:44 |
|
Re: 210's on a 6M
|
kevz0r | Thu, 09 January 2003 06:37 |
|
Re: 210's on a 6M
|
justcallmefrank | Thu, 09 January 2003 10:22 |
|
Re: 210's on a 6M
|
kevz0r | Fri, 10 January 2003 01:49 |
|
Re: 210's on a 6M
|
justcallmefrank | Fri, 10 January 2003 01:56 |
|
Re: 210's on a 6M
|
kevz0r | Fri, 10 January 2003 12:39 |
