| Author | Topic |
|---|
Location:
Perth WA
Registered:
December 2003
|
|
Re: Fitting SC14 to AW11gze
|
Wed, 08 June 2005 07:19
 
|
 |
The outer edge of the support bar to the hole centre of the nut will be a measurement of 130mm. This works for me and it doesn't sit completely against the motor but offset by about 10mm to avoid possible vibration issues.
  
There is 15mm of clearance to the boot wall, with the altered exit pipe pointing directly up. I would expect if you would be able to get an original exit pipe on there , with it having the curve cut off as we did for the other side it would point in the same direction as the standard SC12 adaptor pipe and the original intercooler could even be retained by using a short piece of "hard pipe" or a long section of silicone hose .Why you would want to do this would be supremely beyond me but hey its an idea for tightwads. Also, if this were setup on a RWD setup ( North/South orientation) you could also use this method with the adaptor reversed to point the charge air forward to plumb an intercooler
The final setup should resemble this (this was fitted with an AE92 top pipe)
For any further information, you can email me direct , removing the spam filter at adsportNOSPAM@westnet.com.au
-------------------------------------------------- ---------------
FYI : im using bigport cams, G LTD ECU, liberty WTA cooler, N/A throttle body , direct cold air induction, untuned SAFC-II. The car runs 0.9 Bar all day everyday and pulls F*&^king hard
|
|
|
| | Subject | Poster | Date |
|---|
 |
Fitting SC14 to AW11gze
|
Adsport | Wed, 08 June 2005 07:18 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Wed, 08 June 2005 07:19 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Wed, 08 June 2005 07:19 |
|
Re: Fitting SC14 to AW11gze
|
ra23celica | Wed, 08 June 2005 07:51 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Wed, 08 June 2005 07:53 |
|
Re: Fitting SC14 to AW11gze
|
ra23celica | Wed, 08 June 2005 07:54 |
|
Re: Fitting SC14 to AW11gze
|
4agte | Wed, 08 June 2005 08:31 |
|
Re: Fitting SC14 to AW11gze
|
gearb0x | Wed, 08 June 2005 09:15 |
|
Re: Fitting SC14 to AW11gze
|
mighty_boy | Tue, 14 June 2005 22:06 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Wed, 15 June 2005 01:25 |
|
Re: Fitting SC14 to AW11gze
|
no_tofu_speed | Wed, 15 June 2005 05:30 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Wed, 15 June 2005 11:11 |
|
Re: Fitting SC14 to AW11gze
|
Lachie | Fri, 24 June 2005 05:12 |
|
Re: Fitting SC14 to AW11gze
|
joeninety | Fri, 24 June 2005 09:19 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Fri, 24 June 2005 12:17 |
|
Re: Fitting SC14 to AW11gze
|
oldcorollas | Fri, 24 June 2005 12:47 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Fri, 24 June 2005 13:42 |
|
Re: Fitting SC14 to AW11gze
|
Mr Revhead | Fri, 24 June 2005 21:40 |
|
Re: Fitting SC14 to AW11gze
|
Adsport | Sat, 25 June 2005 03:08 |
|
Re: Fitting SC14 to AW11gze
|
Mr Revhead | Sat, 25 June 2005 07:36 |
