| Author | Topic |
|---|
Location:
Montrose, VIC
Registered:
May 2002
|
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
Mon, 06 January 2003 11:33
 
|
 |
|
It wasn't that my 4K had completely died - it was just the lack of balls, the bearing noise and the oil consumption that inspired me, plus the fact that I was about to take the TA22 to the crusher anyway (an ex paddock car that had been set on fire just too many times!). The whole reason a 4K won't die certainly ain't because its a strong engine - take a look at the rods, crank, etc! However, the extreme lack of balls means there just isn't enough stress on anything to make it fall over - seems to be a trait with a lot of the more pedestrian toyota engines. Likewise geminis, datsuns, etc. - the kind of treatment that I and many others have given to these cars is seriously unthinkable, yet they will always sit up and ask for more. Half the fun is trying to overcome the lack of balls with brutal treatment and still not breaking anything!
|
|
|
| | Subject | Poster | Date |
|---|
 |
HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
bloody_huge23 | Sat, 04 January 2003 02:22 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
Ta22 20 valve | Sat, 04 January 2003 03:48 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
CrAiGzEE | Sat, 04 January 2003 10:50 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
EMP-2TG | Sat, 04 January 2003 23:05 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
bloody_huge23 | Sat, 04 January 2003 23:11 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
Ta22 20 valve | Sat, 04 January 2003 23:27 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
bloody_huge23 | Sun, 05 January 2003 00:00 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
EMP-2TG | Sun, 05 January 2003 06:42 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
bloody_huge23 | Sun, 05 January 2003 09:29 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
EMP-2TG | Sun, 05 January 2003 11:44 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
chrisss | Sun, 05 January 2003 14:40 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
Grega | Sun, 05 January 2003 20:22 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
mrshin | Mon, 06 January 2003 10:45 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
TurboCelica | Mon, 06 January 2003 11:12 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
mrshin | Mon, 06 January 2003 11:33 |
|
Re: HOW TO: Convert Cable Clutch into Hydrolic Clutch (KE30-T50)
|
bloody_huge23 | Tue, 07 January 2003 09:37 |
