| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
2JZGE Computer and Loom Matching
|
Sun, 12 June 2005 02:03
|
 |
I'm slowly gathering info to install a 2JZGE and factroy mangement system into a Toyota Crown. At this stage I'm gathering info on the various loom and computer configurations that have been available on the 2JZGE motors. As it turns out there are over 24 different looms just for motor found in JZA80 Supras alone! So my question is:
Who has had experience in using a loom from one model and a computer from another, and having it all work on their motor? At this stage my ECU part number is 89661-14600, and if the handwriting on the cover is correct - this is from a 1997 Supra. The only complete loom I've been able to find thus far has a part number of 82121-14791 which tells me it's from a 11/93-8/94 Supra - what are my chances of simply plugging this loom into the ECU and having it not only run the motor, but also the auto box behind it?
Other Questions that need answering:
1: What model automatic transmission did the 11/93-8/94 Supra have, and did it have a slip yoke style output shaft?
2: What model automatic transmission did the 1997 Supra have and did it have a slip yoke style output shaft?
|
|
|
