| Author | Topic |
|---|
Location:
perth WA
Registered:
January 2003
|
|
Re: RN90 1JZGTE conversion
|
Sun, 12 June 2005 13:44
 
|
 |
yep , tailshaft modded , just cut off the old yoke and get tailshaft made to correct length with the 1jz style yoke .. alot of tailshaft shops do this . costing around $400 or so
gear mount , again depends on manual or auto .. just req and mount , or modifying the mount to suit .. nothin too hard
brakes .. r33 4 spots go on with a 20mm spacer and the hub machined down about 2-3 mm to fit the disc over the top of the hub .. ( the wheel then holds the disc on )
|
|
|
| | Subject | Poster | Date |
|---|
 |
RN90 1JZGTE conversion
|
DazbaVBZ | Sun, 29 May 2005 09:12 |
|
Re: RN90 1JZGTE conversion
|
Skip | Sun, 29 May 2005 12:23 |
|
Re: RN90 1JZGTE conversion
|
DazbaVBZ | Fri, 10 June 2005 09:07 |
|
Re: RN90 1JZGTE conversion
|
slylux | Fri, 10 June 2005 11:59 |
|
Re: RN90 1JZGTE conversion
|
DazbaVBZ | Fri, 10 June 2005 21:04 |
|
Re: RN90 1JZGTE conversion
|
DazbaVBZ | Sun, 12 June 2005 00:49 |
|
Re: RN90 1JZGTE conversion
|
slylux | Sun, 12 June 2005 13:44 |
|
Re: RN90 1JZGTE conversion
|
DazbaVBZ | Sun, 12 June 2005 23:52 |
|
Re: RN90 1JZGTE conversion
|
Milhouse | Wed, 15 June 2005 05:14 |
|
Re: RN90 1JZGTE conversion
|
Chris Davey | Wed, 15 June 2005 05:37 |
