Location: Toronto, Downtown
Registered: September 2004
Re: Cheap Turbo Install
Sun, 12 June 2005 14:51
you will have to either go with an aftermarket computer or the standard gze computer.
a custom exhaust manifold will have to be fabricated along with a dump pipe.
an i/c will also be needed something like a 1ggte intercooler etc.
a turbo something like a t25, t28 or a skyline gt-t turbo (not sure of their actual name)
then i/c piping will have to be custom fabricated.
The injectors will have to be upgraded to atleast gze 365cc injectors.
Im not 100% sure what your fuel pump is capable of but it might be worth making sure it will be able to support the power you wanna make.
I would expect that at a minimum it will cost you somewhere in the order of $3000
You may need a new clutch at this point aswell that could add another 500 buks.
My suggestion would be to buy a 4agze as it will cost you about 2-2.5k to do if the engine comes complete with loom and once you get sick of the power it wont cost you tooo much to upgrade to a turbo setup
Sun, 12 June 2005 14:51
