F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3SGTE Camshaft Specifications Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
JustenGT4 Forums Junkie Location: Canberra Registered: June 2003	Re: 3SGTE Camshaft Specifications Thu, 16 June 2005 03:10 Those dyno curves pretty well resemble my 264 setup. My cams were from Blitz but apparently pretty well identical to the HK$ equiv in 264. Idle took a bit of work but can be done with the stock ECU and dead simple with a proj ECU. They did seem to lose a little bottom end but hard to say as the swap was done at the same time as the GT25 which is known to be a bit laggy anyway. A mate runs 272's to good effect but he has the JUN stroker kit which no doubt helps. playing around on the dyno we found a HEAP of hp lurking in cam timing. The more modded your engine the more time you should spend chasing the hp with cam timing. From memory 6 deg retarded on the exhaust and 3 deg advance on the inlet gave us best peak hp and still maintained a strong midrange. I'd have to email him to get the exact specs/results. [Report message to a moderator]

	Subject	Poster	Date
	3SGTE Camshaft Specifications	Toobs	Wed, 15 June 2005 03:39
	Re: 3SGTE Camshaft Specifications	Toobs	Wed, 15 June 2005 03:49
	Re: 3SGTE Camshaft Specifications	Classique71	Wed, 15 June 2005 09:07
	Re: 3SGTE Camshaft Specifications	Toobs	Thu, 16 June 2005 01:37
	Re: 3SGTE Camshaft Specifications	Classique71	Thu, 16 June 2005 02:29
	Re: 3SGTE Camshaft Specifications	Joshstix	Thu, 16 June 2005 02:47
	Re: 3SGTE Camshaft Specifications	JustenGT4	Thu, 16 June 2005 03:10
	Re: 3SGTE Camshaft Specifications	sikx5	Thu, 16 June 2005 04:54
	Re: 3SGTE Camshaft Specifications	Joshstix	Thu, 16 June 2005 08:34
	Re: 3SGTE Camshaft Specifications	Toobs	Thu, 16 June 2005 11:34
	Re: 3SGTE Camshaft Specifications	-==L=a=N=c=E==-	Thu, 16 June 2005 23:46
	Re: 3SGTE Camshaft Specifications	Classique71	Fri, 17 June 2005 02:28
	Re: 3SGTE Camshaft Specifications	-==L=a=N=c=E==-	Fri, 17 June 2005 05:45
	Re: 3SGTE Camshaft Specifications	510rob	Fri, 17 June 2005 07:27

Previous Topic:	18rg queries
Next Topic:	Registering a write off

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.