F.A.Q.    Register    Login    Home Members    Search

Classifieds » Miscellaneous » 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ke382TG Forums Junkie Registered: May 2002	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel Wed, 08 January 2003 11:28 Bell housing problems, ignoring the very soft poor casting the following probs * you will be asked which side you want your starter motor fitting on the bellhousing, however it will turn up with both sides having the bulge for the starter motor. Why be given the choice when it will just turn up with both any way?. You will need to have the starter bulge removed and a plate welded in place because A. it looks really bad and B. it is a gaping hole where things can get inside the bellhousing and C. (a small car problem and probably not an issue with your TE72) the bulge casues clearance problems in the already cramped tunnel/engine bay. *the threads tapped in for the clutch slave were rough and daggy. * the face of the bellhouing that attaches to the gearbox has an extraordinary amount of overlap. ie instead of a neat transition from box to housing there is about 20mm to 25mm overlap. Again probably not a great problem in a larger transmission tunnel other than not looking very neat, but in the cramped KE 20/25 tunnel this protrusion had to be removed and new alloy added for strength. * but probably the most frustrating problem encountered is after a final fitment ready to start the car and the starter could not turn over the engine. Inspection revealed that the clutch pressure plate(of a standard size dimension) was butted against the inside of the bellhousing almost the entire way around!!!!(the same clutch was fine inside the previous T50 bellhousing) Gearbox removed and a die grinder to remove large amounts of alloy casting. Sorry about the lengthy post, but this is it, the actual problems encoutered. Some may not be a problem in some vehicles and you have to hope you get a better casting than we did. Shane. [Report message to a moderator]

	Subject	Poster	Date
	4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Mon, 06 January 2003 08:12
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	Twinky	Mon, 06 January 2003 09:51
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	Cool1	Mon, 06 January 2003 09:55
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Mon, 06 January 2003 10:31
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	TE72_Turbo	Mon, 06 January 2003 12:07
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Mon, 06 January 2003 20:12
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	TE72_Turbo	Mon, 06 January 2003 23:46
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Wed, 08 January 2003 10:50
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	TE72_Turbo	Wed, 08 January 2003 11:03
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Wed, 08 January 2003 11:28
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	BigWorm	Wed, 08 January 2003 12:22
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	TE72_Turbo	Wed, 08 January 2003 21:26
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	Ozzidave	Wed, 08 January 2003 12:13
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	thunderbird1	Wed, 08 January 2003 12:45
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	20valve69corona	Wed, 08 January 2003 22:19
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	trueno_gze	Thu, 09 January 2003 06:50
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Thu, 09 January 2003 10:34
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	TA22-3SGTE	Fri, 10 January 2003 06:49
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Fri, 10 January 2003 21:41
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ybs1ow	Sat, 11 January 2003 01:15
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Sat, 11 January 2003 09:48
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ybs1ow	Sun, 12 January 2003 05:20
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	superaw11	Wed, 15 January 2003 02:41
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	killalux	Thu, 16 January 2003 10:27
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	ke382TG	Thu, 16 January 2003 23:25
	Re: 4AGZE: super charger, nevo pulley wheel, sprinter T50 box, standard ZE pulley wheel	superaw11	Fri, 17 January 2003 11:25

Previous Topic:	EMS QI-4 fuel and ignition computer
Next Topic:	stuff for sale - need $$$!

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.