| Author | Topic |
|---|
Location:
Christchurch, New Zealand
Registered:
March 2004
|
|
Re: 3tgte bottom and 2tgeu head
|
Fri, 17 June 2005 22:39
 
|
 |
yes the thermostat block fits straight onto the 2tg head. I have done this using the 3tgteu bottom end with a 3tgeu head.
You will need to swap the thermostat/oil lines block over to the 2tg head, then the exhaust manifold and oil lines are a direct fit up from the block to the turbo.
The tricky part comes when running the oil lines back to the sandwich plate between the oil filter and block, the lines run where the 2tg dizzy mount is in the block (as 3tg run a dummy dizzy thingy) it runs right over the bolt to hold the dizzy in place so its a bit of a pain but it works sweet as.
if you are running an aftermarket computer with ign timing just lock the dizzy, or if you are running fuel only, swap the boost/retard vacuum diagphram (sp?) from the 3tgteu dizzy into the 2tg dizzy, you will probably need to redrill the arm as it is significantly longer than the 2tg one, and will put the timing way out and hence you run out of adjustment on rotating the dizzy.
That is pretty much all there is too it..
Cheers
Logan
|
|
|
| | Subject | Poster | Date |
|---|
 |
3tgte bottom and 2tgeu head
|
lilcrash | Thu, 16 June 2005 02:34 |
|
Re: 3tgte bottom and 2tgeu head
|
setsuna | Thu, 16 June 2005 05:32 |
|
Re: 3tgte bottom and 2tgeu head
|
setsuna | Thu, 16 June 2005 05:36 |
|
Re: 3tgte bottom and 2tgeu head
|
lilcrash | Thu, 16 June 2005 06:52 |
|
Re: 3tgte bottom and 2tgeu head
|
TA22 GT | Thu, 16 June 2005 12:29 |
|
Re: 3tgte bottom and 2tgeu head
|
lilcrash | Thu, 16 June 2005 20:48 |
|
Re: 3tgte bottom and 2tgeu head
|
EMP-2TG | Thu, 16 June 2005 22:15 |
|
Re: 3tgte bottom and 2tgeu head
|
rb20det | Fri, 17 June 2005 12:47 |
|
Re: 3tgte bottom and 2tgeu head
|
bunkyT18 | Fri, 17 June 2005 13:42 |
|
Re: 3tgte bottom and 2tgeu head
|
lilcrash | Fri, 17 June 2005 21:06 |
|
Re: 3tgte bottom and 2tgeu head
|
SRacin | Fri, 17 June 2005 22:39 |
|
Re: 3tgte bottom and 2tgeu head
|
lilcrash | Sat, 18 June 2005 09:19 |
|
Re: 3tgte bottom and 2tgeu head
|
SRacin | Sat, 18 June 2005 23:46 |
|
Re: 3tgte bottom and 2tgeu head
|
pheonix83 | Sun, 19 June 2005 10:32 |
|
Re: 3tgte bottom and 2tgeu head
|
lilcrash | Mon, 20 June 2005 05:12 |
|
Re: 3tgte bottom and 2tgeu head
|
Buster | Fri, 19 August 2005 01:46 |
