| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: How far can I bore a 3K out to?
|
Thu, 09 January 2003 13:52
 
|
 |
Ok, more questions.
Bill: Why did you use the 180B conrod bolts? Were they easier to clearance than the standard K series bolts. We're tempted to put a set of ARP rod bolts in for their cheap insurance factor, however the consensus seem to be that the standard gear will happily see 8000rpm, and we don't intend on going any further.
Jamie: Tell me more about the Gudgeon pin offset and the effect it has in the motor, and how those factors will be affected by changing pistons to something not originally designed for a K motor? Will weigh the bare blocks for you on the weekend if I get a chance and let you know the 4K engine number so you might determine it's age. Tell me more about the different 4K blocks with and without the extra ribbing. It's on the inlet side right? describe it's location and appearance and I'll have a look for it on the 4K block we now have spare?! Go back to the bolt man and ask for metric fine thread bolts (think they'll be m10x1.5 or m12x1.5), in whatever length you need. Bellhousing bolts wont be long enough to go through the engine stand mount and have enough left to thread up safely. Take a sample to confirm the thread sizes.
Finally, for all those following the thread, also see "3K/4K Block Strength" thread in tech and conversions, by Superjamie. Does anyone know if we can link these two threads together as they relate to each other well?
Clint!
|
|
|
| | Subject | Poster | Date |
|---|
 |
3K Rally Motor Performance Rebuild to 1400cc
|
CLG | Fri, 13 December 2002 13:08 |
|
Re: How far can I bore a 3K out to?
|
Bill Sherwood | Fri, 13 December 2002 21:27 |
|
Re: How far can I bore a 3K out to?
|
CLG | Sat, 14 December 2002 17:41 |
|
Re: How far can I bore a 3K out to?
|
THE WITZL | Sat, 14 December 2002 14:59 |
|
Re: How far can I bore a 3K out to?
|
Purple_Beasty | Sat, 14 December 2002 20:43 |
|
Re: How far can I bore a 3K out to?
|
Bill Sherwood | Sun, 15 December 2002 01:05 |
|
Re: How far can I bore a 3K out to?
|
CLG | Thu, 09 January 2003 13:52 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Thu, 09 January 2003 14:35 |
|
Re: How far can I bore a 3K out to?
|
indigoid | Thu, 09 January 2003 15:56 |
|
Re: How far can I bore a 3K out to?
|
bmak | Fri, 10 January 2003 03:54 |
|
Re: How far can I bore a 3K out to?
|
indigoid | Sat, 11 January 2003 08:39 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Sat, 11 January 2003 15:52 |
|
Re: How far can I bore a 3K out to?
|
CLG | Wed, 15 January 2003 15:03 |
|
Re: How far can I bore a 3K out to?
|
CLG | Sun, 19 January 2003 13:47 |
|
Re:3K Performance Rebuild, How far can I bore a 3K?
|
CLG | Tue, 04 February 2003 16:23 |
|
Re: Re:3K Performance Rebuild, How far can I bore a 3K?
|
Super Jamie | Tue, 04 February 2003 21:24 |
|
Re: Re:3K Performance Rebuild, How far can I bore a 3K?
|
CLG | Thu, 27 March 2003 09:58 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Tue, 17 December 2002 03:00 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Tue, 17 December 2002 03:07 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Tue, 17 December 2002 12:54 |
|
Re: How far can I bore a 3K out to?
|
CLG | Sat, 21 December 2002 06:22 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Sat, 21 December 2002 08:45 |
|
Re: How far can I bore a 3K out to?
|
CLG | Tue, 07 January 2003 23:01 |
|
Re: How far can I bore a 3K out to?
|
bmak | Tue, 07 January 2003 23:33 |
|
Re: How far can I bore a 3K out to?
|
Super Jamie | Tue, 07 January 2003 23:48 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
clubagreenie | Thu, 27 March 2003 10:58 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
Super Jamie | Thu, 27 March 2003 20:53 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
CLG | Fri, 28 March 2003 01:20 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
CamZH | Fri, 28 March 2003 01:48 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
bmak | Sat, 29 March 2003 06:48 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
vauhtirotta | Fri, 25 March 2005 08:57 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
PMP020 | Fri, 25 March 2005 11:08 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
Johnny | Fri, 25 March 2005 12:50 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
Joshstix | Sat, 26 March 2005 07:06 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
CLG | Sun, 27 March 2005 08:54 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
ke30king | Sun, 27 March 2005 08:57 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
CLG | Sun, 27 March 2005 11:21 |
|
Re: 3K Rally Motor Performance Rebuild to 1400cc
|
ke30king | Sun, 27 March 2005 12:13 |
