| Author | Topic |
|---|
Location:
Brisbane
Registered:
October 2002
|
|
Re: Changing 1g bottom end bearing
|
Tue, 21 June 2005 09:19
 
|
 |
firstly, is it bige ends {conrod} or mains
if its a single big end, thats the easiest, take the plugs out, spin the motor till the piston is at BDC, undo the bolts most of the way, loosen the cap and then hit the rod off the crank, since the bolts are still slightly done up, it wont get damaged.
remove the cap, check for scoring/scratches/burns on the crank journal, if its just the bearing surface getting fucked out, then dont worry about it, clean the journal, replace the bearing, and torque it all up
where is the oil pump on a 1G anyway, can someone take a pic of the crank snout without the timing gear on please
|
|
|
| | Subject | Poster | Date |
|---|
 |
Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 04:53 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Tue, 21 June 2005 05:24 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 05:30 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Tue, 21 June 2005 05:38 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 05:42 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Tue, 21 June 2005 06:09 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 06:55 |
|
Re: Changing 1g bottom end bearing
|
badboybubby | Tue, 21 June 2005 07:37 |
|
Re: Changing 1g bottom end bearing
|
Mr DOHC | Tue, 21 June 2005 09:19 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Wed, 22 June 2005 01:04 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 02:02 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Wed, 22 June 2005 03:18 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 06:08 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Wed, 22 June 2005 06:18 |
|
Re: Changing 1g bottom end bearing
|
justcallmefrank | Wed, 22 June 2005 06:21 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 06:52 |
|
Re: Changing 1g bottom end bearing
|
Mr DOHC | Wed, 22 June 2005 07:04 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 07:20 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Wed, 22 June 2005 23:58 |
|
Re: Changing 1g bottom end bearing
|
gold28 | Sun, 26 June 2005 22:04 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Mon, 27 June 2005 00:42 |
