| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
Tue, 21 June 2005 13:54
 
|
 |
| munki wrote on Tue, 21 June 2005 23:00 |
Hi Charles
found the pic pm me your email and i will send it your way.
as u can see they are very similar to 2t and 3t efi and looks like the runners will go right in the way of the turbo.
from memory there was one for sale in the trader a few months ago. I think it would be a neat motor to play with 130ps aint bad for an 18r!
i have some 2t and k series efi setup pics too if ur interested k manifold would be useless though.
|
Daniel! thanxs for the offer of pics, PM sent 
am kinda annoyed now about the turbo position... but at least it's in an easy to get to with tools.
The previous setup had many bolts and clampes that were hidden and very hard to reach - this new setup ony has about 4 nuts that are moderately hard to locate with fingers (two on manifold, 1 turbo flange, one turbo oil drain).
i figured that any manifold i adapt would need so much modding that it would be easier to start from scratch.
i found some pics of 4 and 7K efi manifolds (in one of oldcorolla's threads) and they go wide and up ;-(
for now i'll try to get the current setup running - there 's also stuff to sort out like like turbo oil piping, intercooler & priping and a few options for crank-angle sensor so i can run a waste-spark ignition 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Thechuckster's RA40 18Rte- slowly getting back to working order
|
thechuckster | Mon, 13 June 2005 03:24 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
jeffro RA28 | Mon, 13 June 2005 03:34 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
h3ff44 | Mon, 13 June 2005 04:10 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
wilbo666 | Tue, 14 June 2005 06:56 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
munki | Tue, 14 June 2005 12:51 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
thechuckster | Sat, 18 June 2005 11:04 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
brett_celicacoupe | Mon, 20 June 2005 08:53 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
wilbo666 | Tue, 21 June 2005 02:44 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
brett_celicacoupe | Wed, 22 June 2005 11:05 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
munki | Tue, 21 June 2005 13:00 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
thechuckster | Tue, 21 June 2005 13:54 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
brett_celicacoupe | Sat, 18 June 2005 10:17 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
Chris Davey | Tue, 21 June 2005 03:02 |
|
Re: Thechuckster's RA40 18Rte- slowly getting back to working order
|
wilbo666 | Sat, 01 October 2005 16:27 |
