Location: Toronto, Downtown
Registered: September 2004
4agze no spark???
Tue, 21 June 2005 13:57
im helping a friend who has done a 4agze conversion into his n/a aw11. He used to have a 20v with a microtech (which he was now using in the conversion) to cut a long story short he shorted the battery somehow and fried everything electrical in the car. He asked me to come have a look for him as he was trying to wire up the old 4agze ecu to the injectors etc etc.
When i got there the loom looked like some of luigi's finest spaghetti and was strewn all over the engine bay.
The car had no spark and fuel as the fuel pump wasnt turning on.
After realising that he was going the hard way about it by trying to rewire the gze chassis loom to the n/a chassis loom we then used the n/a chassis loom and fuse box and got the fuel pump working.
Now there is no spark...
We tried this and that until i decided to see what error code the ecu would spit out.
it turned out 14 which i believe is the Ignition Signal
and from what ive read could be any of these 3 things
Igniter and ignition coil circuit
Igniter and ignition coil
ECU
We have tried replacing the coil with no success and im about to test the ignighter.
The ecu wasnt in the car at the time of the short but the wires seem to be going to all the right places and are all hooked up we have traced the wires from the ignighter to the ecu and all seems well there any help would be much appreciated
edit: fuses are fine aswell made sure to check that out first
Tue, 21 June 2005 13:57
