| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: Changing 1g bottom end bearing
|
Wed, 22 June 2005 02:02
 
|
 |
there is a support brace you can use for your motor - my mate has one - its basically a bar with a stand at either end which sits on the strut towers.
there is a chain which you attach to your engine lifting hooks and then tension it up - to support the motor. from there you can undo the mounts and then drop the K frame and remove the sump and all that good sort of stuff.
if its only big ends then this could be done with not much fuss.
if you're doing mains then take the whole thing out - you'll have to drop the gearbox to remove the rear main seal as remember the crank goes thru that and thats bolted to the back of the block - then there is the oil pump that the front of the crank goes thru - so yeah - easier to take the whole shebang out and replace it with another - which - given the price of 1G's it might be a cheaper and FAR less stressful alternative?
my 2c anyway
|
|
|
| | Subject | Poster | Date |
|---|
 |
Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 04:53 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Tue, 21 June 2005 05:24 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 05:30 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Tue, 21 June 2005 05:38 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 05:42 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Tue, 21 June 2005 06:09 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Tue, 21 June 2005 06:55 |
|
Re: Changing 1g bottom end bearing
|
badboybubby | Tue, 21 June 2005 07:37 |
|
Re: Changing 1g bottom end bearing
|
Mr DOHC | Tue, 21 June 2005 09:19 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Wed, 22 June 2005 01:04 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 02:02 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Wed, 22 June 2005 03:18 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 06:08 |
|
Re: Changing 1g bottom end bearing
|
Chris Davey | Wed, 22 June 2005 06:18 |
|
Re: Changing 1g bottom end bearing
|
justcallmefrank | Wed, 22 June 2005 06:21 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 06:52 |
|
Re: Changing 1g bottom end bearing
|
Mr DOHC | Wed, 22 June 2005 07:04 |
|
Re: Changing 1g bottom end bearing
|
Grega | Wed, 22 June 2005 07:20 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Wed, 22 June 2005 23:58 |
|
Re: Changing 1g bottom end bearing
|
gold28 | Sun, 26 June 2005 22:04 |
|
Re: Changing 1g bottom end bearing
|
stradlater | Mon, 27 June 2005 00:42 |
