Toymods Car Club Inc: Tech & Conversions => brake upgrade

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » brake upgrade - AE82 twinky Show: Today's Posts :: Show Polls Email to friend

Author

Topic

towe_001
Forums Junkie

Location:
Somewhere on a dirt bowl ...
Registered:
August 2004

Re: brake upgrade - AE82 twinky

Wed, 22 June 2005 13:28

Sam_Q wrote on Wed, 22 June 2005 16:51

I can get some ae-92 single pot calipers and hubs, if the calipers suit a vented disk will they suit either of the two sizes that are avilable? or a more realistic question how do I find out what these are meant to suit, which disk?

P.S its for an ae-82 upgrade also

It depends on which ae82. The single cam used a solid rotor 243x13.5mm while the twin cam used a vented rotor 243x18mm.

The single cam ae90,92 used a solid rotor 243x13.5mm. While the twin cam (4a-fc and 4a-ge ???) ae90, 92, 93 and 95 used a vented rotor 238x18mm. The bit that gets interesting is that the model to go for is the ae93 4a-ge it used a vented rotor 258x22mm. The ae9x series use the same hub as the ae82. (Correct me if i'm wrong)

I think you'll most likely be better/easier to use the rotors from the ae93 4age (DBA708 - from the DBA catalogue and click download) and find the calipers from the ae102 its a bolt-on fit.

More info here
AE92 & AE82 Brake upgrade options....

Edit: Added a url

[Updated on: Wed, 22 June 2005 13:37]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Thu Jul 31 02:24:22 UTC 2025

Total time taken to generate the page: 0.003788948059082 seconds

.:: Contact :: Home ::.