F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1JZ auto with wolf 3d stalling instantly Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Chris Davey Forums Junkie Location: sunny coast, qld Registered: October 2002	Re: 1JZ auto with wolf 3d stalling instantly Fri, 24 June 2005 02:15 CrUZsida wrote on Fri, 24 June 2005 11:59 Have you modded anything? When I ordered my Microtech, I ordered it to be configured to a 4 tooth crank disc instead of the factory 12 tooth (I had modded it) This was all done fine, but I couldn't get the thing to idle under 1000rpm. Idling at 1100rpm, the fan would kick on, it would drop to 950, and then conk out. I eventually sussed it out that Microtech had fucked up my program, and missed changing a value for the crank disc. I believe that the ecu thought the motor was stalling, went into safety mode, cut the fuel pump and cut the ignition. This would obviously happen at about 300rpm normally, but because of the tooth change, that part of the ecu thought it was doing 300rpm (obviously had a 12ms gap between pickups (guess), and anything greater than figure means cut fuel/ignition, value wasn't changed to 3 times that figure). I hope you understood all this. Yes I think I understand this. Quote: I didn't raise this point before because I don't believe its the case with you. I couldn't get it to drop below 950rpm EVER. Regardless of temp, fan, what-have-you. Can you get it to idle lower, with the fan off? Certainly can. We had to adjust the idle up because it was down to about 550-590rpm before. I still believe that its back to mapping. Quote: Also, just because the Wolf isn't controlling the fan, doesn't mean it doesn't think it still is. The ECU could still be switching that ground at the set temp, and changing the fuel figures. I see what you mean here but I also disable the thermo on the wolf so that it wouldn't be switching the ground anymore. Quote: Try and change the output to a shift light at 6000rpm and see what happens. I understand how to change the output but I don't think I could set it at an rpm on this thermo relay. I would have to use one of the aux outputs instead of the thermo fan switch wire. AFAIK they work the same way so it would be easy to rewire. I will have a go at this. Also, forgot to mention that the wolf doesn't have the compensation settings like you were saying with the microtech so that is not an option. [Report message to a moderator]

	Subject	Poster	Date
	1JZ auto with wolf 3d stalling instantly	Chris Davey	Thu, 09 June 2005 06:40
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Thu, 09 June 2005 07:20
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Thu, 09 June 2005 07:30
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Thu, 09 June 2005 07:35
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Thu, 09 June 2005 07:36
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Thu, 09 June 2005 08:44
	Re: 1JZ auto with wolf 3d stalling instantly	sideshow	Thu, 09 June 2005 09:10
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Thu, 09 June 2005 09:37
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Thu, 09 June 2005 09:39
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Thu, 09 June 2005 09:43
	Re: 1JZ auto with wolf 3d stalling instantly	sideshow	Thu, 09 June 2005 09:44
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Thu, 09 June 2005 09:49
	Re: 1JZ auto with wolf 3d stalling instantly	sideshow	Thu, 09 June 2005 10:06
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Thu, 09 June 2005 10:16
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Thu, 09 June 2005 11:01
	Re: 1JZ auto with wolf 3d stalling instantly	sideshow	Thu, 09 June 2005 11:15
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Thu, 09 June 2005 21:42
	Re: 1JZ auto with wolf 3d stalling instantly	Mr DOHC	Thu, 09 June 2005 22:20
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Fri, 10 June 2005 00:06
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 10 June 2005 02:47
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 10 June 2005 00:55
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Fri, 10 June 2005 01:45
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 10 June 2005 02:58
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 10 June 2005 03:15
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Fri, 10 June 2005 04:53
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Fri, 10 June 2005 04:56
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 10 June 2005 04:58
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 10 June 2005 05:08
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 10 June 2005 05:17
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 10 June 2005 05:27
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 10 June 2005 05:44
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Fri, 10 June 2005 07:46
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 24 June 2005 01:46
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 24 June 2005 01:59
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 24 June 2005 02:15
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 24 June 2005 02:24
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 24 June 2005 05:45
	Re: 1JZ auto with wolf 3d stalling instantly	CrUZsida	Fri, 24 June 2005 05:53
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 24 June 2005 06:30
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Fri, 24 June 2005 08:11
	Re: 1JZ auto with wolf 3d stalling instantly	oldcorollas	Fri, 24 June 2005 08:21
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Fri, 24 June 2005 08:38
	Re: 1JZ auto with wolf 3d stalling instantly	MS-75	Fri, 24 June 2005 12:41
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 24 June 2005 22:44
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Fri, 24 June 2005 22:38
	Re: 1JZ auto with wolf 3d stalling instantly	MS-75	Sat, 25 June 2005 11:04
	Re: 1JZ auto with wolf 3d stalling instantly	Allan	Sun, 26 June 2005 00:57
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Sun, 26 June 2005 09:01
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Tue, 28 June 2005 06:01
	Re: 1JZ auto with wolf 3d stalling instantly	Skip	Tue, 28 June 2005 07:07
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Tue, 28 June 2005 08:23
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Tue, 28 June 2005 10:04
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Tue, 28 June 2005 11:37
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Fri, 01 July 2005 11:53
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Sat, 02 July 2005 02:39
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Sat, 02 July 2005 02:53
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Sat, 02 July 2005 02:59
	Re: 1JZ auto with wolf 3d stalling instantly	Chris Davey	Sat, 02 July 2005 23:48
	Re: 1JZ auto with wolf 3d stalling instantly	Kyosho	Sun, 03 July 2005 06:49

Previous Topic:	Need help about Xenon for Celica
Next Topic:	Problems with my Sprinter

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.