F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2jzge Rear Seal Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
aussie260z Regular Location: ACT Registered: April 2005	Re: 2jzge Rear Seal Mon, 27 June 2005 02:28 Of course you can mate, Its going into a 260z - hence my name Ive got a really nice red 260z thats my daily driver and ive got another 260z that needs a complete restoration, Im thinking at the moment, The Resto zed i would like to build as a dedicated race car But will probably not use the 2jzge because im a tad concerned about how much HP i can get it of out, as in how much money it will cost to UP the HP of the 2jzge in comparison to just going out and buying a 2jzget, So ill probably just put the 2jzge into the red 260z and it will be my daily driver, and do something like a 1uzfe or 350chebby into the Resto Zed, Ive got a garage, so i can keep my engine out of the rain So i gots to take of the timing cover and do the front seal like i did the rear one, same goes for the cam seals??? Should i change the welsh plugs? I want to avoid this - when i pulled down a 318 V8 i managed to lose a few welsch plugs in the block when removing them, didnt quite get the technique down pat ie.....tap the side and it spins around in its hole, then you pluck it out, a few of them just got pushed in, The folk who i bought the engine off said the timming belt was changed at 73000km's and the engine is now at 101,000kms - should i still change the belt? & should i should just the belt or should i do the ring gear aswell??? [Report message to a moderator]

	Subject	Poster	Date
	2jzge Rear Seal	aussie260z	Sat, 25 June 2005 04:33
	Re: 2jzge Rear Seal	gianttomato	Sat, 25 June 2005 05:12
	Re: 2jzge Rear Seal	aussie260z	Sun, 26 June 2005 21:49
	Re: 2jzge Rear Seal	gianttomato	Mon, 27 June 2005 00:50
	Re: 2jzge Rear Seal	aussie260z	Mon, 27 June 2005 01:39
	Re: 2jzge Rear Seal	gianttomato	Mon, 27 June 2005 02:11
	Re: 2jzge Rear Seal	aussie260z	Mon, 27 June 2005 02:28
	Re: 2jzge Rear Seal	gianttomato	Mon, 27 June 2005 02:54
	Re: 2jzge Rear Seal	aussie260z	Mon, 27 June 2005 03:05
	Re: 2jzge Rear Seal	gianttomato	Mon, 27 June 2005 03:15
	Re: 2jzge Rear Seal	aussie260z	Mon, 27 June 2005 06:09
	Re: 2jzge Rear Seal	gianttomato	Mon, 27 June 2005 07:37
	Re: 2jzge Rear Seal	aussie260z	Mon, 27 June 2005 10:45
	Re: 2jzge Rear Seal	CrUZsida	Mon, 27 June 2005 10:55
	Re: 2jzge Rear Seal	gianttomato	Mon, 27 June 2005 11:19
	Re: 2jzge Rear Seal	peeack	Tue, 28 June 2005 03:29
	Re: 2jzge Rear Seal	CrUZsida	Tue, 28 June 2005 03:31
	Re: 2jzge Rear Seal	aussie260z	Tue, 28 June 2005 03:31
	Re: 2jzge Rear Seal	CrUZsida	Tue, 28 June 2005 03:34
	Re: 2jzge Rear Seal	peeack	Tue, 28 June 2005 03:53
	Re: 2jzge Rear Seal	gianttomato	Tue, 28 June 2005 04:49
	Re: 2jzge Rear Seal	CrUZsida	Tue, 28 June 2005 04:55
	Re: 2jzge Rear Seal	peeack	Tue, 28 June 2005 04:58
	Re: 2jzge Rear Seal	gianttomato	Tue, 28 June 2005 05:09
	Re: 2jzge Rear Seal	CrUZsida	Tue, 28 June 2005 05:12
	Re: 2jzge Rear Seal	gianttomato	Tue, 28 June 2005 05:23
	Re: 2jzge Rear Seal	CrUZsida	Tue, 28 June 2005 05:28
	Re: 2jzge Rear Seal	peeack	Tue, 28 June 2005 05:35
	Re: 2jzge Rear Seal	gianttomato	Tue, 28 June 2005 05:40
	Re: 2jzge Rear Seal	CrUZsida	Tue, 28 June 2005 05:40
	Re: 2jzge Rear Seal	aussie260z	Tue, 28 June 2005 23:46
	Re: 2jzge Rear Seal	CrUZsida	Wed, 29 June 2005 00:34

Previous Topic:	4agze - gauge readings (oil, exhaust temp, fuel pressure etc)
Next Topic:	easiest way to get a 1G-GTE into a hilux?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.