| Author | Topic |
|---|
Location:
NSW - Coffs Harbour.
Registered:
November 2004
|
|
Re: Camber tops noise
|
Mon, 27 June 2005 13:19
 
|
 |
If the strut top bolts arn't tight enough it well cause the coilover to unload when you go over bumps.
Cause you used standard strut tops on your coilover set-up the top hat is designed to slip over the strut sleeve you need to get new tophats and get them drilled so they sit on the part that the bottom section of the standard strut top locks into or you could get a spacer engineered that sits ontop of this same part and use your exsisting tophats. You will have to make sure the spacer is the correct height so that you can do the bolt on top up tight and there is no play when you pull up or push down on the cambertop. You may need a spacer also with new tophats, you may be able to fix your problem using washers.
|
|
|
