Author | Topic |

Location: townsville NQLD
Registered: February 2004
|
1G-GTE wiring question
|
Fri, 01 July 2005 10:59
|
 |
okay so i finally got my 1ggte today
now i was wondering with the wiring, should i pull all the tape off it and remove all the unnessasary wires and then retape it or should i just leave it how it is now??
question no. 2:
i got the wiring loom and ECU sitting here with me and at the end where the loom plugs into the ecu, there are 2 plugs that fit into the ECU, yet there are 3 ports in the ECU
is this how its supposed to be?
ques 3:
at the same end of the loom (where it plugs into ECU), there are 3 other plugs. what are these for? do they plug into the instruments and ignition switch etc.?? what should i do with these?
ques 4:
near the alternator plug along the loom, there is a 3 pin plug which i presume hooks up to the positive on the battery. 2 of these wires are quite thick
in this plug:
the white goes into: ________?
the yellow goes into: ______?
the black goes into: ___?
sorry for my poor explaining skills
thanks in advance
brett
|
|
|
| Subject | Poster | Date |
 |
1G-GTE wiring question
|
brett_celicacoupe | Fri, 01 July 2005 10:59 |
 |
Re: 1G-GTE wiring question
|
ndgcpr | Fri, 01 July 2005 11:16 |
 |
Re: 1G-GTE wiring question
|
brett_celicacoupe | Fri, 01 July 2005 11:28 |
 |
Re: 1G-GTE wiring question
|
ndgcpr | Fri, 01 July 2005 11:54 |
 |
Re: 1G-GTE wiring question
|
CrUZsida | Fri, 01 July 2005 12:10 |
 |
Re: 1G-GTE wiring question
|
brett_celicacoupe | Fri, 01 July 2005 12:21 |
 |
Re: 1G-GTE wiring question
|
sideshow | Fri, 01 July 2005 13:38 |
 |
Re: 1G-GTE wiring question
|
brett_celicacoupe | Sat, 02 July 2005 05:43 |
 |
Re: 1G-GTE wiring question
|
ndgcpr | Sat, 02 July 2005 07:06 |
 |
Re: 1G-GTE wiring question
|
brett_celicacoupe | Sun, 03 July 2005 09:09 |