Author | Topic |
Location: Strathfield / Sydney
Registered: July 2003
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
Fri, 01 July 2005 22:42
|
|
I had this exact problem, do a search and you should find it, thread was started by myself, something like "can someone identify my diff(s)".
I ended up removing the flanges from both and switching, but a word of warning, it was a REAL prick. The one i had off the car was a locker - put an axle in the vice, with much cursing, hammering and swearing i got the nut off.
The one ON the car. Well. I had to jack up the car, put both wheels on blocks (so i could get under with both wheels on the ground, open centre diff). After realising it wouldn't work any other way (including with a rattle gun), i got a friend of my old mans to come around and hit it with an oxy to heat it up. I then put a T bar on the nut, got my hydraulic jack and jacked upwards into the T bar to rotate it. It came off (at last!).
I guess my point is, it could be harder than you think
|
|
|
| Subject | Poster | Date |
|
TA22 Diff Problem, Tailshaft not lining up
|
-NiCkeL- | Fri, 01 July 2005 04:35 |
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
yrhkira | Fri, 01 July 2005 06:21 |
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
Bananaman | Fri, 01 July 2005 22:42 |
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
-NiCkeL- | Sat, 02 July 2005 06:31 |
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
Grega | Sat, 02 July 2005 09:49 |
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
vin91 | Sat, 02 July 2005 23:43 |
|
Re: TA22 Diff Problem, Tailshaft not lining up
|
-NiCkeL- | Mon, 18 July 2005 02:33 |