| Author | Topic |
|---|
Location:
qld
Registered:
December 2003
|
|
Re: RWD intake and FWD TPS
|
Fri, 01 July 2005 23:42
|
 |
ive personally used an ae93 type throttle body on an ae86 4ag manifold. the only thing i had to do was drill one extra hole in the throttle body itself. there is an air "gallery" in the manifold itself, that neads to line up with a coresponding one in the tb. all tbs have the gallerys on both sides, but fwd tbs utilize the other gallery. the fwd tb does have the corret gallery in it to be used on a rwd manifold, but the hole that goes into the gallery on the intake side of the throttle butterfly isnt drilled. so you just have to drill a hole into it.
thats probably not too clear, but if you have your manifold and tb infront of you, you should be able to see what im talking about. or send me some pics of your tb, and ill mark on them where you need to drill if you like.
|
|
|
