| Author | Topic |
|---|
Location:
cambo
Registered:
May 2002
|
|
Re: how to get torque converter of ceased engine?
|
Sat, 02 July 2005 00:38
 
|
 |
|
ive had to do this a number of times at work. usually when you get under the car and take the cover plate off the gearbox to get to the torgue converter bolts, you can get a crowbar into the flywheel and rotate the engine a little bit at a time. otherwise you have to take the torque converter out with the engine if its REALLY seized (as in a conrod wedged in the block or something similar) so just put a tray under it. if you can be bothered and you really dont want a mess you can take the engine and box out as one then separate after you have it out.
|
|
|
