| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: 4agte TVIS removal/disabling
|
Sun, 03 July 2005 12:26
 
|
 |
mine ran fine bolted straight up, though i used both gaskets from either side of the t-vis plate as it looked to me there was small air gaps where the round ports of the inlet manifold dipped in the middle of the oval ports on the head.
the bolts/studs on the 4agze head are too short for the 4age inlet manifold w/t-vis plate. one of main reasons why i just bolted it straight up with the 2 gaskets together w/out the t-vis plate. i was too lazy to try and get the 2 end studs from my 4age head, i did have to use some washers though.
|
|
|
