| Author | Topic |
|---|
Location:
Sydney
Registered:
October 2003
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
Sun, 03 July 2005 17:07
|
 |
Long story, don't know if it leaks or not. Going to find out that when she gets running. I MIG'd it first up and took some dodgy advice and brazed a couple of areas I couldn't get to with the MIG. Anyways, took it out to my old mans and had him teach me a lesson with the oxy and I've gone over 'most' of the welds. I found a lot of holes around the MIG which leads me to believe there's probably still more I didn't find. And also, the areas with the braze are a bit contaminated by it.
I actually modified the wiring (SW20 loom) to get the alternator on that side. With the standard bracket I was lead to believe I would have had to relieve the rear corner to fit the alternator. I wasn't really ready back then to start experimenting too much.
|
|
|
| | Subject | Poster | Date |
|---|
 |
F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
charliemr2 | Fri, 13 May 2005 08:20 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica
|
Toobs | Sat, 14 May 2005 00:12 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica
|
sleeker162 | Sat, 14 May 2005 13:29 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica
|
da_horse | Sun, 15 May 2005 11:52 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
charliemr2 | Tue, 14 June 2005 04:48 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
da_horse | Tue, 14 June 2005 15:05 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
charliemr2 | Sat, 02 July 2005 23:03 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
davedave | Sat, 02 July 2005 23:23 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
charliemr2 | Sun, 03 July 2005 05:43 |
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
davedave | Sun, 03 July 2005 17:07 |
