| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
|
Re: ST185 front drive shafts
|
Tue, 14 January 2003 08:29
 
|
 |
Josh,
If you're thinking about this for a 3SGTE conversion, just get an SW20 MR2 halfcut with gearbox and all because you'll need everything!. You might need AW11 shafts to use the outer cv joints incase the MR2 ones are larger splined (which I suspect). MR2 shafts also have larger input splines into the gearbox compared to the GT-Four, about 2x as thick.
Regards,
Michael
|
|
|
| | Subject | Poster | Date |
|---|
 |
ST185 front drive shafts
|
Joshstix | Tue, 31 December 2002 05:51 |
|
Re: ST185 front drive shafts
|
Cool1 | Tue, 31 December 2002 08:29 |
|
Re: ST185 front drive shafts
|
Joshstix | Tue, 31 December 2002 08:56 |
|
Re: ST185 front drive shafts
|
Cool1 | Tue, 31 December 2002 09:48 |
|
Re: ST185 front drive shafts
|
4agzebuggy | Thu, 02 January 2003 21:14 |
|
Re: ST185 front drive shafts
|
Necros | Fri, 10 January 2003 02:55 |
|
Re: ST185 front drive shafts
|
Cool1 | Fri, 10 January 2003 05:12 |
|
Re: ST185 front drive shafts
|
Runx T Sport | Fri, 10 January 2003 08:28 |
|
Re: ST185 front drive shafts
|
[mikey] | Tue, 14 January 2003 05:41 |
|
Re: ST185 front drive shafts
|
Joshstix | Tue, 14 January 2003 05:54 |
|
Re: ST185 front drive shafts
|
[mikey] | Tue, 14 January 2003 08:27 |
|
Re: ST185 front drive shafts
|
[mikey] | Tue, 14 January 2003 08:29 |
|
Re: ST185 front drive shafts
|
Joshstix | Tue, 14 January 2003 09:25 |
|
Re: ST185 front drive shafts
|
[mikey] | Tue, 14 January 2003 09:51 |
|
Re: ST185 front drive shafts
|
Joshstix | Wed, 15 January 2003 00:16 |
|
Re: ST185 front drive shafts
|
[mikey] | Wed, 15 January 2003 07:50 |
