| Author | Topic |
|---|
Location:
ACT
Registered:
April 2005
|
|
Re: 260z Conversion
|
Tue, 05 July 2005 07:34
|
 |
Hi Splatt, im still out here, im about half-way through installing my 2jzge VVTi into the Zed, and its a real pain in the a#s, its such a tall sucka with the intake crossing over the head, clearance is very very tight, at the top and the bottom,
As far as the engine mounts go you can easily use the Datto crossmember for the mounting of the engine, or you can do as you suggested and mount rails going back from the crossmember to the TC rods (check hybridz.org - dude did this and there is lots of pics)
Ive got a pic of the Passenger side engine mount of a 1jz into a 240z, i dont know how to post it though,
They used the original Datto crossmember and fabricated some engine mounts to connect to the block, this way meant that you can not run Air-Con though, this is what im doing, there are lots of good bolt holes forward on both blocks,
With the turbo'd motor im pretty sure your clearances will be a real nightmare (width wise), the bloke who had the above done to his zed used a pretty odd looking engine mount, looks like its almost solid - its a cylinder urethane suspension bushing wrapped in mild steel, very very little movement of the engine,
And of course the 1jz and 2jz turbo'd engines are alot easier to fit height wise because you dont have the intake crossing over the head, wish my f#cking intake didnt cross over the head 
By the end of tomorrow i should hopefully have some pics of my engine mounts completed in MDF - and if all goes well, touch wood, i should have the gearbox crossmember and engine mounts completed by the end of this week, early next week,
|
|
|
| | Subject | Poster | Date |
|---|
 |
260z Conversion
|
aussie260z | Fri, 06 May 2005 12:50 |
|
Re: 260z Conversion
|
river | Fri, 06 May 2005 13:04 |
|
Re: 260z Conversion
|
Draza | Fri, 06 May 2005 13:23 |
|
Re: 260z Conversion
|
Intensevil | Fri, 06 May 2005 17:01 |
|
Re: 260z Conversion
|
ed_ma61 | Fri, 06 May 2005 18:37 |
|
Re: 260z Conversion
|
4agte | Fri, 06 May 2005 22:34 |
|
Re: 260z Conversion
|
rb20det | Sat, 07 May 2005 01:28 |
|
Re: 260z Conversion
|
filthman | Sat, 07 May 2005 01:40 |
|
Re: 260z Conversion
|
4agte | Sat, 07 May 2005 05:57 |
|
Re: 260z Conversion
|
filthman | Sun, 08 May 2005 01:18 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 03:41 |
|
Re: 260z Conversion
|
Rallystanza | Sat, 07 May 2005 05:17 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 06:28 |
|
Re: 260z Conversion
|
4agte | Sat, 07 May 2005 06:43 |
|
Re: 260z Conversion
|
ed_ma61 | Sat, 07 May 2005 17:07 |
|
Re: 260z Conversion
|
4agte | Sun, 08 May 2005 13:30 |
|
Re: 260z Conversion
|
BlackSupra | Sat, 07 May 2005 08:22 |
|
Re: 260z Conversion
|
aussie260z | Sat, 07 May 2005 09:00 |
|
Re: 260z Conversion
|
thechuckster | Sat, 07 May 2005 09:53 |
|
Re: 260z Conversion
|
BlackSupra | Sat, 07 May 2005 09:57 |
|
Re: 260z Conversion
|
scrote | Sat, 07 May 2005 15:38 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 00:18 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 00:30 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:16 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 01:17 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:21 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 01:25 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 02:09 |
|
Re: 260z Conversion
|
mrshin | Sun, 08 May 2005 02:30 |
|
Re: 260z Conversion
|
BlackSupra | Sun, 08 May 2005 02:32 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 02:54 |
|
Re: 260z Conversion
|
aussie260z | Sun, 08 May 2005 02:59 |
|
Re: 260z Conversion
|
gianttomato | Sun, 08 May 2005 07:13 |
|
Re: 260z Conversion
|
mrshin | Sun, 08 May 2005 12:10 |
|
Re: 260z Conversion
|
ed_ma61 | Sun, 08 May 2005 16:08 |
|
Re: 260z Conversion
|
4agte | Tue, 10 May 2005 02:46 |
|
Re: 260z Conversion
|
quest | Sun, 08 May 2005 19:02 |
|
Re: 260z Conversion
|
aussie260z | Mon, 09 May 2005 02:44 |
|
Re: 260z Conversion
|
aussie260z | Mon, 09 May 2005 03:03 |
|
Re: 260z Conversion
|
quest | Mon, 09 May 2005 06:04 |
|
Re: 260z Conversion
|
IRA11Y | Mon, 09 May 2005 09:32 |
|
Re: 260z Conversion
|
aussie260z | Tue, 10 May 2005 02:44 |
|
Re: 260z Conversion
|
mrshin | Tue, 10 May 2005 14:32 |
|
Re: 260z Conversion
|
aussie260z | Tue, 10 May 2005 23:28 |
|
Re: 260z Conversion
|
gianttomato | Tue, 10 May 2005 23:53 |
|
Re: 260z Conversion
|
Hodgie | Wed, 11 May 2005 04:03 |
|
Re: 260z Conversion
|
mrshin | Wed, 11 May 2005 14:33 |
|
Re: 260z Conversion
|
aussie260z | Thu, 12 May 2005 03:48 |
|
Re: 260z Conversion
|
Allan | Thu, 12 May 2005 03:54 |
|
Re: 260z Conversion
|
mrshin | Thu, 12 May 2005 14:11 |
|
Re: 260z Conversion
|
Allan | Thu, 12 May 2005 16:14 |
|
Re: 260z Conversion
|
mrshin | Sat, 14 May 2005 12:03 |
|
Re: 260z Conversion
|
aussie260z | Sat, 14 May 2005 09:44 |
|
Re: 260z Conversion
|
Norbie | Sat, 14 May 2005 11:27 |
|
Re: 260z Conversion
|
mrshin | Sat, 14 May 2005 12:01 |
|
Re: 260z Conversion
|
splatt | Tue, 05 July 2005 06:51 |
|
Re: 260z Conversion
|
aussie260z | Tue, 05 July 2005 07:34 |
| Current Time:
Mon Jun 30 08:40:38 UTC 2025 |
Total time taken to generate the page: 0.0060241222381592 seconds |
