Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Clutch and conversion for 302 to w58

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
TD42T
Regular


Location:
Mildura
Registered:
May 2002
Re: Clutch and conversion for 302 to w58 Tue, 14 January 2003 12:39 Go to previous messageGo to previous message
Clutch plate itself should be interchangable(input splines are the same).
Given that you wont be using the Toyota bell housing the type of clutch that you use with the W58 should(almost certainly) work with the R154.
Just because the R154 uses a pull rather than push in the supra doesn't really come into it as most conversions use the engine manufactors clutch setup with a conversion thrust bearing.
When I did my V6 chev hilux conversion I got hold of a clutch book and just searched it till I found a suitable clutch.
I ended up using a Toyota dyna clutch plate(255mm diameter) and a 11" chev pressure plate.
There are numerous 9-9.25-10-10.5-11" clutch plates available for the toyota spline count and size so finding one to suit a ford pressure plate size is easy.
Count the splines on the gearbox input shaft and then measure the shaft diameter and go look at a PBR or whoevers book till you find one.

Marty
  Send a private message to this user    

SubjectPosterDate
Read Message   Clutch and conversion for 302 to w58 ROBBO_ma61Tue, 14 January 2003 11:37
Read Message   Re: Clutch and conversion for 302 to w58 NorbieTue, 14 January 2003 11:44
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Tue, 14 January 2003 11:50
Read Message   Re: Clutch and conversion for 302 to w58 CLGTue, 14 January 2003 12:33
Read Message   Re: Clutch and conversion for 302 to w58 CLGTue, 14 January 2003 12:37
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Tue, 14 January 2003 12:41
Read Message   Re: Clutch and conversion for 302 to w58  TD42TTue, 14 January 2003 12:39
Read Message   Re: Clutch and conversion for 302 to w58 TD42TTue, 14 January 2003 12:44
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Tue, 14 January 2003 13:00
Read Message   Re: Clutch and conversion for 302 to w58 CLGTue, 14 January 2003 13:03
Read Message   Re: Clutch and conversion for 302 to w58 TD42TTue, 14 January 2003 13:11
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Tue, 14 January 2003 13:35
Read Message   Re: Clutch and conversion for 302 to w58 CLGTue, 14 January 2003 13:40
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Tue, 14 January 2003 13:47
Read Message   Re: Clutch and conversion for 302 to w58 CLGTue, 14 January 2003 14:03
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Wed, 15 January 2003 07:33
Read Message   Re: Clutch and conversion for 302 to w58 ROBBO_ma61Wed, 15 January 2003 09:00
Previous Topic:5k efi ?
Next Topic:Oil catch can

Goto Forum:
-=] Back to Top [=-

Current Time: Tue Feb 25 14:19:09 UTC 2025

Total time taken to generate the page: 0.009688138961792 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.