| Author | Topic |
|---|
Location:
adelaide
Registered:
May 2002
|
|
Re: KE35 Front Strut Conversion.
|
Wed, 06 July 2005 09:39
 
|
 |
71-74 Corolla Modifications, Technical tips and How To's
A bit old (model wise), but good info none-the-less.
http://www.netwiz.net/~tcar/ctechtips.html
The Oldcorollas FAQ
An FAQ dealing with KE1x to KE7x Toyota Corollas
http://www.superjamie.net/oldcorollas/other/conver sions.html
Boneyard Brigade
US site, but still got some good hints.
http://www.grmotorsports.com/boneyard.html
Jonnys Old Corolla Page
Another great page, check out the "Corolla Handling Info" page. Smile
http://www.geocities.com/jonnyr_1973/
http://www.garagedori.com/tech/rt132_struts_into_k e35.php
qoute from Jonny2TG: "I have a KE55 Corolla, and had done this conversion. (I refer to it as my TE37 now if I may, 2T-G etc)
When using the XT130 Corona struts, you will also need to use the steering knuckles/arms that bolt to them at the bottom. RA23 Celica knuckles are the same. You will have to cut off the spring mounts from both the Corona and Corolla struts. Weld the Corolla spring seats onto the Corona struts. Use the standard Corolla spring top and strut tops.
Or, go to a coilover setup."
qoute from mrshin: "Later car I know, but here's an idea:
On my KE70 I'm using R33 turbo rotors (297mm) and calipers (4 pot), hilux drums on the back (too lazy to switch them for anything else; they were on the diff) and a landcruiser master cylinder. Wasn't too hard to do, and works relatively well."
just to name a few....
sory i cant be more specific...
|
|
|
