F.A.Q.    Register    Login    Home Members    Search

Classifieds » Engines, Accessories and other Mechanicals » Flywheel, Pressure Plate and Clutch (MR2 or Celica) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jese1218 Regular Location: Melbourne, Australia Registered: March 2005	Re: Flywheel, Pressure Plate and Clutch (MR2 or Celica) Fri, 08 July 2005 13:15 I'd say they will. The flywheel is off a MR2 3SGTE, Gen 2, so it'll def bolt up. Pressure plate and clutch are all dependant on that. Only thing to check would be the spline/input shaft size, and if the starter motor will engage the same way it does with the MR2 box. I think it will. [Report message to a moderator]

	Subject	Poster	Date
	Flywheel, Pressure Plate and Clutch (MR2 or Celica)	jese1218	Sat, 18 June 2005 07:38
	Re: MR2 Flywheel, Pressure Plate and Clutch	jese1218	Tue, 21 June 2005 05:57
	Re: MR2 Flywheel, Pressure Plate and Clutch	jese1218	Fri, 24 June 2005 06:27
	Re: MR2 Flywheel, Pressure Plate and Clutch	toy.car	Sun, 26 June 2005 00:26
	Re: MR2 Flywheel, Pressure Plate and Clutch	jese1218	Sun, 26 June 2005 07:06
	Re: Flywheel, Pressure Plate and Clutch (MR2 or Celica)	jese1218	Sat, 02 July 2005 14:45
	Re: Flywheel, Pressure Plate and Clutch (MR2 or Celica)	jese1218	Wed, 06 July 2005 07:32
	Re: Flywheel, Pressure Plate and Clutch (MR2 or Celica)	cycleofabuse	Fri, 08 July 2005 10:04
	Re: Flywheel, Pressure Plate and Clutch (MR2 or Celica)	jese1218	Fri, 08 July 2005 13:15

Previous Topic:	1GGE Polished Rocker Covers + ZE Coilpacks
Next Topic:	HKS SSQV Copy

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.