F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Setting up 2tg carbs, the basics? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Turbo_Tim Regular Location: Townsville Registered: February 2005	Re: Setting up 2tg carbs, the basics? Sat, 09 July 2005 14:14 Yeah that sounds about right. Ill give it another go tomorrow with a bit more effort. What are the 2 bigger holes in the manifold for, between the two points for 1 +2 and 3+4 respectively. I figured the idle and mixture screws. I guess the first step is to get it sorted. The manifold had no vacuum fittings so I just put them from the 3tc manifold on for the brake booster and a 3 way fitting for 3 vacuum lines. What are the 2 vacuum looking lines on the carbs like, 1 on each carb? I figured where the jets are too, does anywhere know where to get jet for mikuni's as no doubt we will need to make some changes there too. Thanks for the help. Ill keep playing around tomorrow. [Report message to a moderator]

	Subject	Poster	Date
	Setting up 2tg carbs, the basics?	Turbo_Tim	Sat, 09 July 2005 09:00
	Re: Setting up 2tg carbs, the basics?	ChuckLandwehr	Sat, 09 July 2005 09:58
	Re: Setting up 2tg carbs, the basics?	Turbo_Tim	Sat, 09 July 2005 14:14
	Re: Setting up 2tg carbs, the basics?	Turbo_Tim	Sun, 10 July 2005 08:24

Previous Topic:	Getting the Crank Pulley Off (with complication)
Next Topic:	timing belt headache

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.