| Author | Topic |
|---|
Location:
NSW
Registered:
May 2002
|
|
Re: Making a custom manifold
|
Fri, 17 January 2003 02:28
 
|
 |
Anthony,
Actually, if you look at a standard 1G manifold, it comes off the head, turns 90 degrees downwards for about 5" then does a 180 degree turn into the bottom of the turbos. It really isnt a bad design.
On the other hand, if you look at a 1J/2J or 7M manifold, these are all "stump" or "log" manifolds so to speek, where the gas takes the shortest possible route to reach the turbine. As you were saying, this gives great low down response, hence the reason why 1/2J's are monsters off the line.
My 2 cents anyway 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Making a custom manifold
|
japspec | Tue, 14 January 2003 09:36 |
|
Re: Making a custom manifold
|
TD42T | Tue, 14 January 2003 09:55 |
|
Re: Making a custom manifold
|
TE72_Turbo | Tue, 14 January 2003 10:57 |
|
Re: Making a custom manifold
|
TD42T | Tue, 14 January 2003 11:55 |
|
Re: Making a custom manifold
|
japspec | Tue, 14 January 2003 21:45 |
|
Re: Making a custom manifold
|
japspec | Wed, 15 January 2003 06:47 |
|
Re: Making a custom manifold
|
TD42T | Wed, 15 January 2003 09:06 |
|
Re: Making a custom manifold
|
TRACTION_ISSUES | Wed, 15 January 2003 10:51 |
|
Re: Making a custom manifold
|
japspec | Thu, 16 January 2003 01:31 |
|
Re: Making a custom manifold
|
mrshin | Thu, 16 January 2003 04:11 |
|
Re: Making a custom manifold
|
TD42T | Thu, 16 January 2003 06:51 |
|
Re: Making a custom manifold
|
TRACTION_ISSUES | Thu, 16 January 2003 08:41 |
|
Re: Making a custom manifold
|
japspec | Thu, 16 January 2003 12:38 |
|
Re: Making a custom manifold
|
gold28 | Thu, 16 January 2003 20:50 |
|
Re: Making a custom manifold
|
TRACTION_ISSUES | Fri, 17 January 2003 02:28 |
|
Re: Making a custom manifold
|
TD42T | Fri, 17 January 2003 03:44 |
