F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » UZZ31 Tranny code 46 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
CrUZsida Forums Junkie I supported Toymods Location: Australia Registered: November 2003	Re: UZZ31 Tranny code 46 Wed, 13 July 2005 05:29 Quick follow up to this Both the UZZ31 and UZS131 run the A341E tranny. Both tranny's have the same pinouts. Tested the box in the car and the spare box I have, both the same Here is the pinouts. Check the wiring in the loom and it turns out the the B+ for S4 didn't have +12v. So there must be an open circuit somewhere. So I just wired up B+ for S3 to B+ for S4. Haven't been able to test drive it yet because I am working on getting SP2 working properly. Will hopefully drive it later this week. [Report message to a moderator]

	Subject	Poster	Date
	UZZ31 Tranny code 46	CrUZsida	Sun, 03 July 2005 05:51
	Re: UZZ31 Tranny code 46	MacroP	Sun, 03 July 2005 09:34
	Re: UZZ31 Tranny code 46	CrUZsida	Sun, 03 July 2005 10:20
	Re: UZZ31 Tranny code 46	MacroP	Sun, 03 July 2005 10:48
	Re: UZZ31 Tranny code 46	MacroP	Sun, 03 July 2005 10:49
	Re: UZZ31 Tranny code 46	MacroP	Sun, 03 July 2005 10:56
	Re: UZZ31 Tranny code 46	MacroP	Sun, 03 July 2005 10:58
	Re: UZZ31 Tranny code 46	CrUZsida	Sun, 03 July 2005 10:59
	Re: UZZ31 Tranny code 46	CrUZsida	Wed, 13 July 2005 05:29

Previous Topic:	Big-end bearing failure with pics - 6 mo since rebuild - any ideas?
Next Topic:	Soarer speakers

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.