thought i'd dig this thread back up as i have a few questions myself,
I just bought a second hand Dual sport which apparently has lambda readout.
i found this in the manual
"LAMBDA 00
Lambda 00 selects Air/Fuel ratio to be displayed on various LCD screens. This feature is designed to be used with Bosch wideband Lambda sensor. When no sensor is connected to the ECU 16.0 A/F will be displayed.
NOTE: The ECU will not display correct A/F readings until 4 minutes after power on, when the Sensor has reached
proper operating temp.
The ECU will perform temperature compensation calculations if the Lambda sensor temperature is overridden by the exhaust
temperature. The sensor should be fitted just after the collector of the exhaust system when normally aspirated or
Supercharged. If turbo charged the sensor should be fitted approx. 1 metre down stream of the turbo."
so this likely means it is the Bosch LSU4 they use yes?
also how is the dual sport limited compared to other ecu's?