| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
|
Re: Radiator return pipe relocation
|
Sat, 18 January 2003 09:47
 
|
 |
seriously, if you are doing it you should try and use the ga70 radiator.. espically if your planning on runinng a big single pump 30odd psi like I think you are.
I just did the 1g conversion and I used the standard radiator shearly for speed of conversion and the car cooks in hot weather like I had today 35C and sits at half on normal days, it does ok but you cant go to hard on the turbos or it produces too much heat.
relocate the top pipe to the passanger side of the filler neck and the bottom pipe from the passanger side corner to the drivers side corner... you will see when you try and sit it all in there.
|
|
|
