F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 550 HP 18R-G - Possible?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
JustenGT4 Forums Junkie Location: Canberra Registered: June 2003	Re: 550 HP 18R-G - Possible?? Mon, 18 July 2005 03:27 Yup, not even that hard really. The bottom end is pretty well bullet proof so for this level of hp i wouldn't even change rods. Forgies of course at around 8.5:1, 272 inlet cam with a 282 exhaust 11m lift for both, ARP head studs (stock head bolts are a weakness), big arse turbo and good engine prep. If the have the yammie head then not much porting required. My 18RGT would rev to 8000rpm with a custom flywheel and a knife edge on the crank wouldn't hurt. The rest is just good engine balancing, assembly. A few dollars but nothing outrageous and certainly nothing particularly special to get the numbers you are after. A few 800-900hp 18RGT used to kick a round the European drag circuit a few years back and they were nothing special in terms if engine builds. [Report message to a moderator]

	Subject	Poster	Date
	550 HP 18R-G - Possible??	Lambolica	Mon, 18 July 2005 02:57
	Re: 550 HP 18R-G - Possible??	JustenGT4	Mon, 18 July 2005 03:27
	Re: 550 HP 18R-G - Possible??	Lambolica	Mon, 18 July 2005 04:00
	Re: 550 HP 18R-G - Possible??	JustenGT4	Mon, 18 July 2005 04:09
	Re: 550 HP 18R-G - Possible??	Lambolica	Mon, 18 July 2005 04:21
	Re: 550 HP 18R-G - Possible??	CelicaRA45	Mon, 18 July 2005 08:57
	Re: 550 HP 18R-G - Possible??	THE WITZL	Mon, 18 July 2005 09:14
	Re: 550 HP 18R-G - Possible??	jeffro RA28	Mon, 18 July 2005 09:42
	Re: 550 HP 18R-G - Possible??	Mr DOHC	Mon, 18 July 2005 09:48
	Re: 550 HP 18R-G - Possible??	CelicaRA45	Mon, 18 July 2005 10:17
	Re: 550 HP 18R-G - Possible??	brett_celicacoupe	Mon, 18 July 2005 10:37
	Re: 550 HP 18R-G - Possible??	Steve M	Mon, 18 July 2005 16:11
	Re: 550 HP 18R-G - Possible??	Joshstix	Mon, 18 July 2005 21:49
	Re: 550 HP 18R-G - Possible??	7mgtema71	Tue, 19 July 2005 00:17
	Re: 550 HP 18R-G - Possible??	kingmick	Tue, 19 July 2005 06:05
	Re: 550 HP 18R-G - Possible??	oldcorollas	Tue, 19 July 2005 13:26
	Re: 550 HP 18R-G - Possible??	Mr DOHC	Tue, 19 July 2005 13:45
	Re: 550 HP 18R-G - Possible??	oldcorollas	Tue, 19 July 2005 13:58
	Re: 550 HP 18R-G - Possible??	jeffro RA28	Tue, 19 July 2005 11:30
	Re: 550 HP 18R-G - Possible??	7mgtema71	Tue, 19 July 2005 22:57
	Re: 550 HP 18R-G - Possible??	THE WITZL	Wed, 20 July 2005 04:15
	Re: 550 HP 18R-G - Possible??	mrshin	Tue, 19 July 2005 13:54
	Re: 550 HP 18R-G - Possible??	mrshin	Tue, 19 July 2005 14:05
	Re: 550 HP 18R-G - Possible??	wolverine	Tue, 19 July 2005 14:48
	Re: 550 HP 18R-G - Possible??	kingmick	Tue, 19 July 2005 21:16

Previous Topic:	AARRH! At my wits end!
Next Topic:	Setting up timing (Crank angle sensor) on DLI 4agze

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.