| Author | Topic |
|---|
Location:
Newcastle
Registered:
May 2002
|
|
Re: hiperboost and external wastegate
|
Mon, 18 July 2005 10:41
 
|
 |
ok.....
lets go
for starters, i am going to call the air inlet closest to the the valve (the exhaust) the bottom of the waste gate.
if you connect your boost line to the bottom of the gate, then you will have boost set at whatever the spring pressure is. ie.8psi.
to fit the hyperboost - teeoff this line. the box(restricter and bleed) is then conected to this teed line and attached to the top of the gate. opposed to using hyperboost on internal wastegates, start with the restrictor closed and the bleed open.
this should give spring pressure (8psi). as you open the restictor air will pass to the top of the gate. the more pressure you add to the top, the more boost you get, close the bleed when you have almost reached the desired boost level. this is the fine control. if you add 1psi to the top of the gate, you now have 9psi boost etc.
the valve that controls how fast the boost comes on goes on the line going to the bottm of the gate, on the wastegate side of the tee piece.
take a breath....
i am pretty sure this is right, having set up a few of these so far - mine was the first extwernal gate car we set these up on.
Cheers
Stew
|
|
|
| | Subject | Poster | Date |
|---|
 |
hiperboost and external wastegate
|
Chris Davey | Sat, 16 July 2005 08:42 |
|
Re: hiperboost and external wastegate
|
Chris Davey | Sun, 17 July 2005 23:27 |
|
Re: hiperboost and external wastegate
|
MR. 2 | Sun, 17 July 2005 23:40 |
|
Re: hiperboost and external wastegate
|
Chris Davey | Mon, 18 July 2005 00:12 |
|
Re: hiperboost and external wastegate
|
THE WITZL | Mon, 18 July 2005 01:43 |
|
Re: hiperboost and external wastegate
|
Chris Davey | Mon, 18 July 2005 01:54 |
|
Re: hiperboost and external wastegate
|
MS-75 | Mon, 18 July 2005 09:17 |
|
Re: hiperboost and external wastegate
|
bbaacchhyy | Mon, 18 July 2005 21:26 |
|
Re: hiperboost and external wastegate
|
TOY77 | Mon, 18 July 2005 10:41 |
|
Re: hiperboost and external wastegate
|
Chris Davey | Wed, 20 July 2005 11:47 |
|
Re: hiperboost and external wastegate
|
bbaacchhyy | Wed, 20 July 2005 21:16 |
|
Re: hiperboost and external wastegate
|
Chris Davey | Mon, 18 July 2005 23:00 |
|
Re: hiperboost and external wastegate
|
MS-75 | Tue, 19 July 2005 00:16 |
|
Re: hiperboost and external wastegate
|
dcving | Mon, 18 July 2005 23:59 |
|
Re: hiperboost and external wastegate
|
TOY77 | Tue, 19 July 2005 08:55 |
|
Re: hiperboost and external wastegate
|
Chris Davey | Wed, 20 July 2005 22:37 |
|
Re: hiperboost and external wastegate
|
bbaacchhyy | Wed, 20 July 2005 22:50 |
