Toymods Car Club Inc: Tech & Conversions => 5MGE help

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 5MGE help Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Norbie
Forums Junkie

Location:
Brisbane
Registered:
May 2002

Re: 5MGE help	Tue, 19 July 2005 03:06

I once had a cold start injector become stuck open, so even when it was unplugged it was apraying shiteloads of fuel into the plenum. This could be another place to look if you have unexplained uber-richness. My fix was to disconnect it from the fuel rail completely and plug up the hole with a bolt and thread sealant. And despite what you may think, it wasn't hard to start it cold after that. [Report message to a moderator]

Subject Poster Date

Read Message 5MGE help jesseT18 Sun, 17 July 2005 08:20
Re: 5MGE help TurboRA28 Sun, 17 July 2005 08:28
Re: 5MGE help jesseT18 Sun, 17 July 2005 08:31
Re: 5MGE help bexi Sun, 17 July 2005 13:37
Re: 5MGE help Allan Sun, 17 July 2005 13:40
Re: 5MGE help bexi Mon, 18 July 2005 08:05
Read Message Re: 5MGE help STR8 2.8 Mon, 18 July 2005 08:33
Re: 5MGE help TurboRA28 Tue, 19 July 2005 01:35
Re: 5MGE help Norbie Tue, 19 July 2005 03:06
Re: 5MGE help Allan Tue, 19 July 2005 04:05
Re: 5MGE help bexi Tue, 19 July 2005 11:13
Re: 5MGE help STR8 2.8 Tue, 19 July 2005 12:26

Previous Topic: newbie needs help with 6m-ge pin-outs
Next Topic: extractors

Current Time: Mon Jul 28 19:55:56 UTC 2025

Total time taken to generate the page: 0.0038540363311768 seconds

.:: Contact :: Home ::.