| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: Wiring 2jzge into 260z
|
Thu, 21 July 2005 04:09
 
|
 |
Should be pretty straight forward.
To actually run the thing you only need a handful of wires hooked up to power. All the wiring should be in the wiring diagrams in the repository (ie which ones need a STRT signal, which ones require IGN and which ones require a constant 12 V). Those that need IGN and STRT inputs, I'd splice from your existing 260Z wiring and run them through fused relays, so the ECU gets a good signal from fresh wire rather than thru oxidized 30 year old wire. I found the little JB Camira fuse boxes up in the back of the LHS engine bay to be very nice - hold 4 fuses and 2 Bosch relays. I'd also wire in a circuit opening relay for the fuel pump.
And to quote Cool1, make sure your earths are good.
As a guide, I suggest this link.
www.autoshop101.com
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wiring 2jzge into 260z
|
aussie260z | Thu, 21 July 2005 02:24 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Thu, 21 July 2005 04:09 |
|
Re: Wiring 2jzge into 260z
|
Henn | Thu, 21 July 2005 05:39 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Thu, 21 July 2005 05:41 |
|
Re: Wiring 2jzge into 260z
|
Henn | Thu, 21 July 2005 06:48 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Sat, 29 October 2005 06:50 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Sat, 29 October 2005 07:07 |
|
Re: Wiring 2jzge into 260z
|
brett_celicacoupe | Sat, 29 October 2005 07:33 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Sat, 29 October 2005 23:41 |
|
Re: Wiring 2jzge into 260z
|
Manny | Sun, 30 October 2005 01:08 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Mon, 31 October 2005 04:58 |
|
Re: Wiring 2jzge into 260z
|
Manny | Mon, 31 October 2005 05:36 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Mon, 31 October 2005 07:34 |
|
Re: Wiring 2jzge into 260z
|
Alchemist | Mon, 31 October 2005 10:10 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Tue, 01 November 2005 04:59 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Tue, 01 November 2005 05:26 |
|
Re: Wiring 2jzge into 260z
|
sideshow | Tue, 01 November 2005 07:00 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Tue, 01 November 2005 22:38 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Wed, 02 November 2005 08:00 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Wed, 02 November 2005 22:01 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Fri, 04 November 2005 22:22 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Fri, 04 November 2005 23:04 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Fri, 04 November 2005 23:41 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Sat, 05 November 2005 02:31 |
|
Re: Wiring 2jzge into 260z
|
wilbo666 | Sat, 05 November 2005 03:12 |
|
Re: Wiring 2jzge into 260z
|
gianttomato | Sat, 05 November 2005 03:33 |
|
Re: Wiring 2jzge into 260z
|
wilbo666 | Sat, 05 November 2005 04:24 |
|
Re: Wiring 2jzge into 260z
|
Norbie | Fri, 11 November 2005 00:10 |
|
Re: Wiring 2jzge into 260z
|
mrshin | Sun, 06 November 2005 08:59 |
|
Re: Wiring 2jzge into 260z
|
aussie260z | Thu, 10 November 2005 23:46 |
