| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Changing the Track
|
Thu, 21 July 2005 09:25
 
|
 |
| M.W.P. wrote on Thu, 21 July 2005 17:01 |
This is also what i have been told here in SA.
Remeber, the +26mm is track... not per wheel (which is 13mm).
If you go over that +26mm, it has to be engineered.
|
by the sounds of it it will be engineered anyhoo..
my goal is to actually increase track by 100mm in total.. i have a good argument tho 
as per original question, if all you are effectively doing is changing the hib mounting face position, and the bearing and load positions are the same, the only thing that will be different is possibly the loading on the wheel studs, but the total forces on the stub axle should remain the same..
sounds like basically you are adjusting the hub/rim unit internally, but not altering it as a whole unit.
it's fiiiiiine
|
|
|
