i think im on the brink of finishing my 4age (from aw11 mr2) into a toyota sprinter
however i have a problem..i turn the key the engine cranks but doesnt fire. i believe the problem is there is no fuel getting to the engine.(beacuse the relays are not wired in)
i think my problem is that because the aw11 loom has a N1 connector (connects the body loom to the engine loom ) that has a pin for the engine relay and efi relay , where as the sprinter has a different loom set up.
the question i ask (providing what i said above is true and makes sense) is how and where do i wire the the n1 connector wire to the sprinter relays..
there are two relays>> one in the engine bay fuse box and one behind the drivers kick panel . i believe them to both be "M4 relays"
can any body out there shed some light on this problem??
Fri, 22 July 2005 05:09
