a H4 globe has 3 plug yeah? well the way it works is one posts acts as a ground for your globe the other two posts is for your power. at low beam you will get power to only one of these powered posts and at high beam you will get power at both posts, which says you have a dodgy connection in either your plug or a wire has come un-attached from the plug. If you are not getting power to both it could just be that the ground is not connecting.
leaver your slots out a bit in the plug to see if you can make a re-connection to your globe (battery disconnected obviously)
Fri, 22 July 2005 14:55
