Location: Devonport Tasmania
Registered: June 2004
Re: 3TGTE Bore
Mon, 25 July 2005 08:12
speak to sean maloney at IDB Automotive.
forged pistons will set u back 800-1000 bucks.
what computer are you going to be using ?
If you are using the std computer then dont bore it out too much, as it will affect your fueling requirements.
Also if you are looking at lower compression, then u will definately need an aftermarket computer, otherwise you will just run out of fuel map with more boost.
Mon, 25 July 2005 08:12
