F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ke20 master cylinder upgrade Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ke1500 Regular Location: Adelaide Registered: October 2002	Re: ke20 master cylinder upgrade Tue, 26 July 2005 03:45 Pedal is fine, not spongy, but it is also quite rigid i guess you could say. If you press hard no doubt at 150kph you could send the car into a 4 wheel spin, but at the same time, if grampa hopped in the car he'd probably say 'geez, those brakes dont work very well' - compared to his brand new over boosted piece of turd. Unboosted is not an issue providing you get the bore diameter right. stick with 7/8 and you'll be fine. My mates 1600 runs rx7 twin spots and soon to be R31 rears. Supposedly all the datto dudes run 7/8's in that setup and its fine. Im pretty sure KE10 & KE20 use the same master cylinder, so i'll try and find my reciept and let you know a part number. i know i had a btch of a time trying to get one that would fit. [Report message to a moderator]

	Subject	Poster	Date
	ke20 master cylinder upgrade	Bananaman	Sun, 24 July 2005 06:06
	Re: ke20 master cylinder upgrade	smitty1	Sun, 24 July 2005 23:22
	Re: ke20 master cylinder upgrade	ke1500	Mon, 25 July 2005 04:09
	Re: ke20 master cylinder upgrade	ke382TG	Mon, 25 July 2005 04:27
	Re: ke20 master cylinder upgrade	ke1500	Mon, 25 July 2005 23:18
	Re: ke20 master cylinder upgrade	Turdslot	Mon, 25 July 2005 05:36
	Re: ke20 master cylinder upgrade	Bananaman	Mon, 25 July 2005 12:49
	Re: ke20 master cylinder upgrade	ke1500	Mon, 25 July 2005 23:20
	Re: ke20 master cylinder upgrade	ke382TG	Tue, 26 July 2005 00:47
	Re: ke20 master cylinder upgrade	ke1500	Tue, 26 July 2005 03:45
	Re: ke20 master cylinder upgrade	Bananaman	Tue, 26 July 2005 09:02
	Re: ke20 master cylinder upgrade	ke1500	Tue, 26 July 2005 23:14
	Re: ke20 master cylinder upgrade	bantech	Wed, 27 July 2005 00:02
	Re: ke20 master cylinder upgrade	old-school-ke20	Wed, 27 July 2005 10:52
	Re: ke20 master cylinder upgrade	ke1500	Wed, 27 July 2005 22:58
	Re: ke20 master cylinder upgrade	Bananaman	Wed, 27 July 2005 10:44
	Re: ke20 master cylinder upgrade	rollin_stock	Wed, 27 July 2005 11:18
	Re: ke20 master cylinder upgrade	old-school-ke20	Mon, 01 August 2005 09:41
	Re: ke20 master cylinder upgrade	ke1500	Wed, 27 July 2005 23:08
	Re: ke20 master cylinder upgrade	Bananaman	Sun, 31 July 2005 00:30
	Re: ke20 master cylinder upgrade	ke1500	Sun, 31 July 2005 22:58
	Re: ke20 master cylinder upgrade	Bananaman	Tue, 02 August 2005 11:56
	Re: ke20 master cylinder upgrade	ke1500	Tue, 02 August 2005 22:58

Previous Topic:	2tgeu, turbo or cams???
Next Topic:	1jz into vk

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.