F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » DIY Port and Polish Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jeffro RA28 Regular Location: Tamworth Registered: August 2004	Re: DIY Port and Polish Tue, 26 July 2005 09:26 Hmmm, i was always told that when it comes down to final surface finish the flow doesnt really differ enough to notice, and if it shall then it would differ at a maximum of 4%. I have not yet seen a difference on the flow bench from a port that is shiny like a mirror and a rougher sanded finish on the exact same port. [Updated on: Tue, 26 July 2005 09:27] [Report message to a moderator]

	Subject	Poster	Date
	DIY Port and Polish	michaelhaynes110	Mon, 25 July 2005 13:31
	Re: DIY Port and Polish	oldcorollas	Mon, 25 July 2005 19:27
	Re: DIY Port and Polish	jeffro RA28	Mon, 25 July 2005 21:32
	Re: DIY Port and Polish	oldcorollas	Tue, 26 July 2005 04:11
	Re: DIY Port and Polish	Lukass	Mon, 25 July 2005 22:52
	Re: DIY Port and Polish	michaelhaynes110	Tue, 26 July 2005 08:07
	Re: DIY Port and Polish	jeffro RA28	Tue, 26 July 2005 09:26

Previous Topic:	Hydraulic clutch in a ke30 2 door
Next Topic:	1ggze RA40 radiattor clearance (Have read all the articles)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.