F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Leaning out problem.... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
MS-75 Regular Location: Adelaide Registered: June 2002	Re: Leaning out problem.... Tue, 26 July 2005 10:06 Ah hah. I didn't realise you had an FCD in there. If that one is clamping the MAP signal at 1 bar then that's the problem without a doubt. Grab the FCD with the suitable range as mentioned by norbie and you'll be able to get rid of the SARD regulator. My bet is that the SARD has a higer rate than the stock reg, effectively masking the leanout in the top end-but not actually fixing the problem as it is due to the ECU stopping increases in fuel supply at 1 bar. One concern I have is that if you bump the boost up further with this FCD, that as the MAP signal is clamped the ECU won't drop ignition timing out. In an extreme case you could suffer detonation-and the associated damage to pistons etc. Have you fitted the wheels up yet? I haven't sent off the nuts yet as we had a major family medical catastrophy last week and I have spent my time waiting in ICU for the last few days (looking good now though). I'll get them off before friday though mate. Take it easy mate Sean [Report message to a moderator]

	Subject	Poster	Date
	Leaning out problem....	Southo	Sun, 17 July 2005 02:16
	Re: Leaning out problem....	Norbie	Sun, 17 July 2005 07:45
	Re: Leaning out problem....	Southo	Sun, 17 July 2005 14:38
	Re: Leaning out problem....	oldcorollas	Sun, 17 July 2005 16:42
	Re: Leaning out problem....	Norbie	Mon, 18 July 2005 04:04
	Re: Leaning out problem....	Chris Davey	Sun, 17 July 2005 23:25
	Re: Leaning out problem....	Southo	Mon, 18 July 2005 01:45
	woo hoo - 245kW - Leaning out problem....fixed....:)	Southo	Mon, 25 July 2005 09:58
	Re: Leaning out problem....	sideshow	Mon, 25 July 2005 10:04
	Re: Leaning out problem....	Southo	Mon, 25 July 2005 13:21
	Re: Leaning out problem....	Norbie	Tue, 26 July 2005 00:23
	Re: Leaning out problem....	Southo	Tue, 26 July 2005 01:47
	Re: Leaning out problem....	Norbie	Tue, 26 July 2005 01:56
	Re: Leaning out problem....	Southo	Tue, 26 July 2005 02:27
	Re: Leaning out problem....	MS-75	Tue, 26 July 2005 10:06
	Re: Leaning out problem....	sideshow	Tue, 26 July 2005 11:34

Previous Topic:	3TGTE 200rwkw???
Next Topic:	3TC head on 2TC block

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.